Super Anti-jamming Stepper Motor Controller Board SPC-1 Single-axis Stepper Motor Pulse Generator With DIN Rail Support

Performance parameters:

 

Wide voltage input, DC 12-24V,

Reversed polarity protection and short circuit protection;

The signal input: low effective;

The optimal S - type acceleration curve- run for 2000 turns/min;

The maximum output frequency can reach 20K, high speed optocoupler output

The input and output are all high-speed optocoupler;

The built-in potentiometer and external potentiometer speed control can automatic switch;

There are various control modes, easy to set up, very practical

 

 

 

 

 

 

Function:

 

1. S2, S1 both OFF: automatic return mode

Press the start button to run the motor forward to the positive limit, the motor reverse operation to the reverse limit is again.

So the cycle if not in the host computer set up the number of operations, it has been running.

Press the stop button to stop the motor at once.

2, S2, S1 are both ON: Point dynamic mode

Press the stop button to stop the motor is running.

Press the start button to start the motor to release the start button to stop the motor to stop running and run to the counter limit stop

3, S1 ON, S2 OFF :single round trip mode

Press the start button to reverse the motor running to the reverse limit stop, and then forward to the positive limit stop. Again

The second press continues to execute before the motion.

Press the stop button to stop the motor in the process of movement.

4. S1 OFF, S2 ON: single trigger mode.

Press the start button to stop the motor running to the reverse limit stop and then press the run to the forward limit stop so the loop

Press the stop button to stop the motor in the process of movement.

5, When switch the mode must cut off power first.

 

 

Video demonstration:

 

Please contact us for the video demonstration.

 

 

 

DIN Rail support:

 

 

 

 

 

Application show:

 

 

 

 

Fixing:

 

DIN guide rail fixing: 87 (W) *62 (L) mm*70mm (H). Height is from guide rail to the highest of power supply board.