1 x 6 Axis MACH3 breakout board

1 x USB Cable

1. Products brief introduction :

• The CNC control board is designed for MACH3 software used in computer with line print terminal.

• The CNC control board is extensively used in the CNC machining,such as: CNC engraving machine,CNC lathes,

• It can be the most cost-effective method using the CNC control board with mach3 software in the computer.

2. Future:      

• 1, the output and the input signal No. whole process through dedicated high-speed chip, the signal correction, amplification, removes unnecessary interference signal, make the machine run more stable.

• 2, the computer's LPT port power supply and power the rest of the isolated power supply, so that between the computer and the machine can be effectively isolated. Thus further ensuring the security and stability. So that the computer and machining data more secure

• 3, a total of five input signals to communicate with the host computer, all via the optical coupling isolation, can be set to: limit the origin of the knife, start, stop, spindle speed input, MPG input, etc. in which any of five functions.

• 4, a total of 12 output signals are available. It can support up to 6 axis control output. You can only choose one of these or several axes to control. This 12 outlets, some are functional reuse. In use, an output port can only be used when a function.

• 5, there are three possible ad hoc support MACH3 software programmable control relays. By controlling the MACH3 software, you can control any one relay pass, off. Each relay has energized lights, more intuitive use, easy to use. This three relays can be used to control liquid coolant, the coolant mist, gas liquid coolants hoist. It can also be used to control devices such as solenoid valve power switch.

• 6, ad hoc high-speed optical coupling isolation to control the spindle speed. It can be output within 2.5KHZ the PWM signal, the output port of the parallel port P1. This interface board has a 0-10V a PWM into the D / A circuits. It can output 0-10V level to control some of the market only analog speed control inverter thereby control the spindle speed. It is noted that the PWM output with 0-10V output can only choose one. Not both.

• 7, interface board can be connected common cathode or common anode output to stepper drives or servo drives (servo drive must support digital signal). 5V output level.

• 8, wide voltage input power supply: 9-35VDC power supply

3. Function Description:

1: PC parallel port and USB power interface

2: External sensor input interface 

Port describle: 

• P10 -- IN1 E-stop

• P11 -- IN2 Alternate

• P12 -- IN3 Alternate

• P13 -- IN4 3Axis limited 

• P15 -- IN5 Alternate

   

Motor control output port 

• P2 -- X Axis pulse

• P3 -- X Axis direction

• P4 -- Y Axis Pulse

• P5 -- Y Axis direction

• P6 -- Z Axis pulse

• P7 -- Z Axis direction

• P8 -- A Axis pulse

• P9 -- A Axis direction

• P14 -- relay port

• P16 -- relay port

• P17 -- relay port

Shipping terms:

Our products are sold worldwide.

But if your country is more difficult to transport goods, please contact us in advance to confirm shipping cost.

Payment:

We accept paypal credit, bank transfer, western union etc. 

Payment must be made within 7days calendar days of the auction end time.

Problem and Feedback:

Please give us the opportunity to resolve any problem, we will try our best to help you.

Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback. 

Thanks very much in advance.

 Refund:

If you are not satisfied with our package like the products is damage, please do not sign it and contact us immediately.

If it is possible, please take some photos or make a small video about it. It will help us to solve the problems.

Note:

We can produce the product according to our customer's design. 

If you need something is very special, please contact us about it.