| Motor Type: | DC Motor |
|---|---|
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
| Package Weight: | 0.1kg (0.22lb.) |
Quick Details
Specifications
Description:
1, using photosensitive resistance induction light intensity, built-in relay, can directly control ac or dc load,
Maximum load capacity: normally open interface communication 0 v - 250 v / 10 a, dc 0 v, 30 v / 10 a.
2, can be adjusted through the potentiometer sensitivity, by adjusting the potentiometer, set the start relay threshold, when the dark at the threshold, module, relay or absorption, light on the threshold, the relay release;
Intelligent control design, after the relay operation, automatic threshold, solves the problems of critical value repeated action;
4, modules, with functions of meter, the reverse power will not damage the module;
5, equipped with the power indicator light (red), road relay status indicator light (blue)
6, is equipped with four fixed bolt hole, convenient installation;
7, module size: 5.0 cm * 3.0 cm * 3.0 cm;
8, 30 cm long photosensitive resistance detection module with a free lead;
Directions for use:
1, photosensitive resistance module is sensitive to ambient light, commonly used to detect the environment around the brightness of the light change;
2, module in ambient light and dark in the setting threshold, relay or absorption, common and often start through to disconnect) (and normally closed end, when the external environment in the bright light setting threshold, relay disconnect, common and often start off (connected with normally closed end);
3, public side, normally open, normally closed three ports is equivalent to a double switch, relay coil electricity, public end and beginning conduction, often without electricity, public end with normally closed end conduction;
Electrical parameters:
When working current: 5 v is less than 90 ma (relay action not less than 5 ma)
12 v is less than 50 ma (relay action not less than 5 ma)
When the 24 v is less than 30 ma (relay action not less than 5 ma)
Working temperature: recommended - 20 ℃ to 60 ℃ (limit working temperature range - 30 ℃, 70 ℃)
Load capacity: relay often start mouth maximum load capacity: dc 0 to 30 v / 10 a, 0-250 - v / 10 a communication
Relay normally closed port maximum load capacity: dc 0 to 28 v / 10 a, 0-125 - v / 10 a communication
Shipping list:
1 * photoswitch module
1 * 30 cm fuses of photosensitive resistance sensor