| Motor Type: | DC Motor |
|---|---|
| Model Number: | HY-20A-2 |
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
| Package Weight: | 0.1kg (0.22lb.) |
Quick Details
Specifications
Working voltage: dc regulated power supply 9 v - 48 v voltage
(the highest support 48 v, cannot exceed 48 v voltage)
(note the power supply voltage is negative, never wrong polarity reverse direction)
2. The motor power support:
Support normal working current 20 a load of 500 w power down a dc motor speed control.
3. Support circuit parameter:
Normal work: 20 a current (support instant high speed motor starting current is up to 25 a)
Locked-rotor current: 30 a biggest (5 s)
Speed ratio: 0-100% (that is, the lowest is stopped, the highest is the fastest speed state)
16 KHZ PWM frequency:
Speed control methods: potentiometer adjustment 0-5 v adjustment range or enter 0 to 5 v voltage control signal to adjust. 10-20 k k potentiometer rotating button (potentiometers for three line connection: there are two is to control the end, a earth, two line end at top speed conditions such as motor voltage of: 5 v level voltage. 0 to 5 v control connection: 0 to 5 v control signal by PWM - 5 vinput among terminals
Can control signal to the governor GND connection
4. Support the frequency conversion speed is controlled PWM signal input parameters:
PWM signal input requirements: only support 5 v inverter PWM signal input
PWM signal input wiring methods: please connection as shown on the shell
Respectively: positive signal by PWM + 5 v Input terminal station
Negatively charged by PWM signal - 5 v Input terminal
GND terminal blank instead
Product appearance size:
To the ear size: 81 * 50 * 31 mm
With the ear size: 90 * 50 * 31 mm