| Model Number: | AFP2435 |
|---|---|
| Motor Type: | other |
| Unit Type: | piece |
| Package Size: | 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in) |
| Package Weight: | 2.0kg (4.41lb.) |
Quick Details
Specifications
AFP2435 PLC 4 axes independent FP2SH Positioning units Multifunction type New Original
Features
1. Scanning time of 1 ms for 20 k steps
The program of 20 k steps can be executed in 1 m/s.
The result is a dramatically decreased tact time and high-speed device.
2. Large programming capacity: Maximum 120 k steps
Both the large programming capacities of 32 k, 60 k and 120 k are available depending on the model.
3. Optional small PC card is also available.
The small PC card is available for programming backup or data memory expansion. This allows data processing of great amounts of data.
4. Built-in comment and calendar timer functions.
These functions, options with the FP2, are built right into theFP2SH.
* The I/O units and intelligent units are the same for the FP2 series.
Positioning units Multifunction type (Pulse output type)
| Part No. |
AFP2432 |
AFP2433 |
AFP2434 |
AFP2435 |
|
| Product No. |
FP2-PP21 |
FP2-PP41 |
FP2-PP22 |
FP2-PP42 |
|
| Output type |
Transistor |
Line driver |
|||
| Number of axes controlled |
2 axes, independent |
4 axes, independent |
2 axes, independent |
4 axes, independent |
|
| Position command |
Command units |
Pulse (The program specifies whether Increment or Absolute is used.) |
|||
| Max. pulse count |
Signed 32 bits (-2,147,483,648 to +2,147,483,647 pulses) |
||||
| Speed command |
Command rang |
1 pps to 500 kpps (can set in 1 pps) |
1 pps to 4 Mpps (can set in 1 pps) |
||
| Acceleration/ deceleration command |
Acceleration/deceleration |
Linear acceleration/deceleration, S acceleration/deceleration (this takes the form of an “S”) |
|||
| “S” Acceleration/deceleration |
Can select from Sin curve, Secondary curve, Cycloid curve and Third curve. |
||||
| Acceleration/deceleration time |
0 to 32,767 ms (can set in 1 ms) |
||||
| Home return |
Home return speed |
Speed setting possible (changes return speed and search speed) |
|||
| Input terminals |
Home input, Near home input, Over limit input (+), Over limit input (–) |
||||
| Output terminals |
Deviation counter clear output signal |
||||
| Operation mode |
E point control (Linear and S accelerations/decelerations) P point control (Linear and S accelerations/decelerations) Home return operation (Home search) JOG operation JOG positioning operation Pulser input function Transfer multiplication ratio (× 1, × 2, × 5, x 10, × 50, × 100, × 500, × 1,000) Real-time frequency change Infinity output |
||||
| Startup time |
0.02 ms or 0.005 ms selecting possible |
||||
| Other functions |
The flag to compare the elapsed value is built in. (The timing signal outputs at the optional position during an operation.) |
||||