5 AXIS CNC 200KHz USB Mach3 Card Controller With Mach3 Remote Control

Note:1. If you need Manual ,pls leave us a message

2.We will choose the most suitable express for you

Description:

DDSMXV5.0 is designed by our Studio, it is a CNC system based mach3.Its  version is 5.0 now.You do not need to add other Hardware,and you can  complete the signal conversion from the G-code to the movement of the  stepper motor drive control. This card is compatible with most stepper drives and servo drives. And it is perfect weapon to  replace mach3 parallel interface board. DDSMXV5.0 include DDSM3V5.0   DDSM4V5.0 DDSM5V5.0  DDSM6V5.0,they are 3/4/5 axes mach3CNC card. These  4 cards use the same Hardware platformDDSMXV5.0.They are limited to 3,4,5,  axes for different voice of customer .They use the same manual.

1. Simultaneously control 5 stepper motors.
2. With 24 programmable input interface , can be configured to be "limit",  "E-stop" and other functions.
3. With 14 programmable output interface, can work with water-cooling or  mist-cooling spindle and other devices.
4.. PWM/VSO(0-10V) spindle control mode .
5. USB interface, support MACH3 software.
6. DCDC electrical isolation.
7.With maximum 200KHZ stepper motor pulse control output , suitable for most  machine system.
8.Dimensions:120*72*20mm.
9.Weight:180g.

Requirements of Computer:

Basic Configuration:

1)CPU:1GHz;

2)Memory:512MB

3)500MB Available disk space

4)USB 2.0

Recommended configuration:

1)CPU:2GHz Dual Core;

2)Memory:2GB;

3)1G Available disk space

4)USB 2.0



Product Feature:

1)USB communication interface, and power supply for the board.

2)10 IO input, opto-isolated, It Can be configured to limit the emergency  stop and other functions, all of them are 2edg port.

3)14 IO input with no opto-isolated but with iso-IC. This port is set to IDC  2.54mm port.

4)14 IO output with no opto-isolated but with iso-IC. This port is set to  IDC 2.54mm port.

5)2IO output with opto-isolated for spindle.

6)up to 6 axes stepper-motor control port. Each port has up to 200KHz plus  output.

7)COTEX-M3 of NXP-LPC is main control chip.

• Hand/Manual Control Box Connect CNC USB Mach3

• 
  Introduction:
  
  1)SKTFTV1 is a hand control box only for USB MACH3 CARD (e.g: DDSM3,  DDUM6V5.0 and DDMDT card)
  
  2)This card connect with USB MACH3 CARD by USART port
  
  3)It's only need 4 wires, there are RXD/TXD/+5V/GND
  
  4)Most operation of software MACH3 is set to this box, it's convenient to  control the machine by this box
  
  
  
  Specification:
  
  1)High performance, low price
  
  2)Most function of mach3 is set to this box
  
  3)Supply voltage: 5VDC
  
  4)XYZAB 5 axes' coordinate display on the screen
  
  5)FRO/SRO/SJR this 3 parameter display on the creen and can be modified
  
  6)The function of move XYZAB by hand is set to the keyboard
  
  7)Senior function (e.g: HOME,GOTO ZERO, ZERO is set to the keyboard)
  
  8)Also base function (e.g: START,PAUSE,STOP,RESET is set to the keyboard)
  
  9)The material of this box is aluminium,and it's oxidized to deep blue
  
  10)The panel of this box is acrylic, and it's transparent

• Include:

• 1 x 5 AXIS Card

• 1 x Controller

• 1 x Cable