Package include:

• 1 x 3 axis cnc system motion controller
• 1 x 8GB USB Flash Drive
• 1 x USB cable
• 
• 
• 
• 
• 
• 
• 

• 1.1) Introduction of Product

  The DDCSV1 is the 4 axis and 4 axes motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.

  The DDCSV1 numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation.

  The panel layout structure of DDCSV1 is rational. The common off-line operation can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set.

  This specificationintroduces the operation method of caving machine’s special off-line CNC system, DDCSV1 and the machine tool connection as well as operation specification. By lots of graphical representation and examples, the uses can quickly learn to use the DDCSV1 CNC system.

   

  1.2 ) Performance parameter of Product

  Ordinary digital input interface of 16-circuitoptocoupler coupling isolation

  Ordinary digital input interface of 3-circuit optocoupler coupling isolation

  Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output);

  Support the 4 axis stepper motor control, the highest control pulse output of single axis is 500KHz;

  ARM9 main control chip;

  FPGA core algorithm chip;

  4.3 inches TFT screen, resolution ratio: 480*272;

  17 operational keys;

  The main control equipment is 18V-32V power input, the current capacity is required not to be lower than 0.5A;

  Support the USB flash disk to read the G code,and the size of G codefile has no requirement;

  Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market

• Support the panel key with single-axis manual operation, manual step and CONToperation;

• Support the operation of quickly specify the running position;

   Support the multi coordinate systems (with automatically saving function in case of power cut);

  Support the function of saving data automatically after power down (press the start to automatically save the data in the operation, automatically save the data after power down)

Shipping

• Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately
• We ship to worldwidebut If your country’s custom is strict, please contact us before you bid to check detail and confirmed.

Payment

• We accept credit card,bank account,western union,moneybook etc
• Payment must be made within 48hours of the auction end time
• Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.

Problem&Feedback

• Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
• We are a new member in ebay now,and need understand both of sides
• Pls email us before you want to leave any negative feedback

Refund

• When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos
• Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost

Contact us

• Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
• Customer’s satisfaction is very important to us.