I. Package included:

1 x 600W Brushless Driver with Control Panel

1 x 400W Brushless Motor without Hall

1 x Collet ER11 3.175MM

1 x Motor Mount

 

II. Description:

This brushless driver is without hall.

It can be used to engrave metal or non-metal and other materials.

 

III. Specification Feature:

 

Driver:

1) High performance, low prices

2) DSP main control module

3) No current passing when no movement

4) Voltage range 24VDC-60VDC

5) Demountable panel

6) Maximum driver power 600W

7) 3 debugging ways: Panel potentiometer, external voltage signal, external PWM Signal

8) Maximum driver motor running speed 12000R/Min.

9) Speed testing port for user to inspect the real speed.

10) Internal over-voltage, over-current and stalling inspection

11) Input signal TTL compatible

 

Motor:

• Power: 400W
• Input Voltage: 48V
• Rotating speed: 12000 R/Min
• Torque: 0.45 N.m
• Insulation resistance: > 2ohms
• Dielectric strength: 400V
• Diameter: 55mm
• Chuck portion length: Arbor parts 35mm, (including the nut and sandwich 43mm)
• Part chuck diameter: 16mm
• Total motor length: 172mm (comprising gripping parts and motor)
• Spindle Weight: 1.1KG
• Spindle runout: about 0.01-0.03.
• Mount:
• Product outline dimension is 118*76*33mm, as picture 1-7 shows. The two installing holes size is 110mm

 

IV. Connection:

Connection interface definition:

 

 

3 control modes

1. Panel button speed control+ Panel start/stop control

Panel button speed control+ Panel start/stop control connection,

Please see the picture 2-4. In this mode, if the control system need to collect motor speed data, then FG, GND port on NVBDH+ need to connect with signal collection port, GND port on controller. Cable thick yellow, thick green and thick blue is the U\V\W phase of the motor, they connect with UVW port on the drivers respectively. No hall connection.

 

2. External analog speed control + external interface start/stop control

External analog speed control + external interface start/stop control connection

Please see the picture 2-5. The VSI is analog speed control interface; connect VSI to controller analog output; CW and CCW control the motor rotating direction, CW and GND connect with motor CW.

 

3. External PWM speed control + external interface start/stop control

NVBDL+ external PWM speed control + external interface start/stop control connection

Please see the picture 2-6.In the mode of PWM control, connect PWM port on NVBDL+ to PWM output port on controller.

 

 

Panel definition: