| Model Number: | HBS86H |
|---|---|
| Motor Type: | Stepper Motor |
| Voltage: | 24V |
| Power Supply: | DC |
| Unit Type: | piece |
| Package Size: | 10cm x 5cm x 15cm (3.94in x 1.97in x 5.91in) |
| Package Weight: | 0.9kg (1.98lb.) |
Quick Details
Specifications
Leadshine Hybrid Servo Drives two-phase HBS86H used for AC and DC with fans
Features:
- 32-bit DSP based vector control algorithm to combine advantage of open-loop stepper brushless servo drives
- Step/Direction or CW/CCW command input
- Default maximum 200K frequency; 500K optional
- Input voltage: 20~80 VAC, or 36~110 VDC
- Load-based automatically adjusted output current of 0~8.2A
- Default 4,000 (1/20) microstepping resolution; 200-104,000 (increase by 200) software configurable
- No Stall and no loss of step. Closed loop between the drive and driven motor to eliminate loss of move synchronization in open loop stepper systems.
- Smooth motor movement; extra low motor heating
- Fast response, no delay and zero settling time
- High torque at starting and low-middle speed; high stiffness at standstill
- No tuning for easy configuration over traditional servo systems
- No overshooting; no hunting over traditional servo systems
- Much lower cost than traditional servo systems
Introduction:
The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 3-phase stepper motor combined with a fully digital, high performance drive and an internal encoder which is used to close the position, velocity and current loops in real time, just like servo systems. It combines the best of servo and stepper motor technologies, and delivers unique capabilities and enhancements over both, while at a fraction of the cost of a servo system.
Applications:
The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. Its great feature of fast response and no hunting make it ideal for applications such as bonding and vision systems in which rapid motions with a short distance are required and hunting would be a problem. And i t is ideal for applications where the equipment uses a belt-drive mechanism or otherwise has low rigidity and you don't want i t to vibrate when stopping.
Specifications
1. Electrical Specifications (Tj = 25oC/77oF)
2. Operating Environment
3. Mechanical Specifications:
