| Motor Type: | Stepper Motor |
|---|---|
| Model Number: | 4 Axis CNC Stepper Motor Driver TB6600 |
| Usage: | 4 axis controlling stepper motor of CNC Router |
| is_customized: | Yes |
| Unit Type: | piece |
| Package Size: | 22cm x 20cm x 18cm (8.66in x 7.87in x 7.09in) |
| Package Weight: | 0.4kg (0.88lb.) |
Quick Details
Specifications
Intelligent 4 Axis Stepper Motor Driver TB6600
| Features: | |
| 1:integrated high-speed microcomputer intelligent control chip,with plug-in LCD display and hand, automatically detect the computer to automatically control the movement of the shield handle control functions,digital can simultaneously track record computer data and handle control mobile data 2:The driver XYZ-axis or Z axis of the knife can be done automatically, without complex computer software operation 3:up to 5A stepper motor drive current,adjustable. 4:up to 16 segments,more accurate,run more smoothly. 5:overload automatic protection function of the flow through the warm, protect your computer and peripherals . 6:bipolar constant-current chopper drive,low speed creeping phenomenon,noise, non-resonant region. 7:a closed optical isolation, two-stage signal processing,to fully protect your computer and equipment. 81 the road 0-10V/PWM governor signal output. 9:Rd input control, you can set the limit stop,which is divided into the knife.
| |
| Electrical properties (ambient temperature Tj = 25 degree): | |
| Input power | 12 - 48V DC power supply |
| Output current | 4.5A (peak 5A) |
| Driven approach | Bipolar constant-current PWM drive output |
| The drive motor | 42,57,86 stepper motor,two-phase -4 phase (4-wire,6 wire,8 wire stepper motor) |
| Weight | About 300g. |
1:ST button to press the handle into the lower-level setup menu, the setup is complete press the OK button to return to the main work interface
2:Press the corresponding axis of the handle CL button four axis clear 0, according to the B1 replaced a line, press the OK button to exit the clear 0
3:The four-axis real-time recording computer running coordinates and manually move the coordinate value of the computer running data + manually move data.
1:In order to ensure the accuracy of the knife, the knife before check put a knife to the height of the parameters of the tool diameter is set correctly
2:the need to make sure the knife instrument wiring and limit switch wiring status is normal.
3:B2 keys and press to confirm OK to enter the automatic tool operation and automatically stop after the completion of.
4:Press the keyboard (A-) exit status of the school knife
1:ST button press the handle into the lower settings menu, the setup is complete press the OK button to return to the main interface of
2:shift downstream handle B1 button settings,
3:handle B2 button corresponding anti-white set at function selection
4:input handles digital keys to set the digital parameters
Before the test machine, please note the following
1,A test machine first to 12V voltage test machine, 42-step,please with 12-16V/DC power 57 stepper choose 16-24V/DC power, 86 stepper election 24-36V/DC power
2,the stepper motor power and current (model)
3,to determine the wiring of the stepper motor
The pin definitions
1.Parallel port control is defined as follows:
| PIN14 | PIN1 | PIN3 | PIN2 | PIN1 | PIN5 | PIN4 | PIN1 | PIN7 | PIN6 | PIN1 | PIN9 | PIN8 | PIN16 |
| Relay | X Allow | X Direction | X Pulse | Y Allow | Y Direction | Y Pulse | Z Allow | Z Direction | Z Pulse | A Allow | A Direction | A Pulse | 0-10VPWM |
2.Limit 1 ~ PIN9 defined as follows (figures defined inside the interface marked)
| X-axis limit | Y-axis limit | Emergency stop | Z-axis limit | Alternative input | DC- |
| InterfaceP1 | InterfaceP2 | Interface P3 | Interface P4 | Interface P5 | Interface P6-P9 |
| Thecorresponding computerP12 | Corresponding computerP13 | Corresponding computer P15 | Corresponding computer P11 | Corresponding computer P10 | GND |
3.Output interface is defined (in the picture for 22 to 1)
| P1 | P2 | P3 | P4 | P5 | P6 | P7 | P8 | P9 | P10 | P11 | P12 | P13 | P14 | P15 | P16 | P17 | P18 | P19 | P20 | P21 | P22 |
|
|
| XA+ | XA- | XB+ | XB- | YA+ | YA- | YB+ | YB- | ZA+ | ZA- | ZB+ | ZB- | AA+ | AA- | AB+ | AB- | MO + | GND | GND | MO - |
Power is connected to 12 48V 8A (Optional according to the stepper motor operating current) above switching power supply, received marked on the power input interface.
12V power output is used to pick up the 12V cooling fan.
Package list:
1 * Professional 4 Axis TB6600HG Stepper Driver
1 * Controller (Build-in)
1 * LCD Display Panel (Build-in)
1 * Parallel Cable
1 * CD
6 * Terminal
