Model Number: | MA860H |
---|---|
Motor Type: | Stepper Motor |
Voltage: | 24V |
Power Supply: | DC |
Unit Type: | piece |
Package Size: | 15cm x 10cm x 5cm (5.91in x 3.94in x 1.97in) |
Package Weight: | 0.6kg (1.32lb.) |
Quick Details
Specifications
Leadshine MA860H stepper motor drive
The MA860H Stepper Driver Board Controller is a high performance microstepping driver based on pure-sinusoidal current control technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, so the Nema23, Nema34 and Nema42 stepper motors with a 2.6A-7.2A current will be suitable.
Features
High performance, cost-effective
Supply voltage from "18V AC to 80V AC" or "24V DC to 110V DC"
Output current from 2.6A to 7.2A
Self-adjustment technology, full to half current self-adjustment when motors from work to standstill via switching off SW4
Pure-sinusoidal current control technology
Pulse input frequency up to 300 KHz
TTL compatible and optically isolated input
Automatic half-current reduction as long as switching off SW4 when motors stop
16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
Suitable for 2-phase and 4-phase motors
Support PUL/DIR and CW/CCW modes
Short-voltage, over-voltage, over-current and short-circuit protection, protect the PC, motors, driver etc from being damaged
Applications
Suitable for a wide range of stepping motors, from NEMA size 23 to 42
For processing various pattern mould
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc.
For carving portrait, scenery, handwriting, sealing, etc.
1 x MA860H CNC Stepper Motor Driver Controller (2.6A-7.2A AC18-80V DC24-110V )