Product Main

Quick Details

Motor Type: Stepper Motor
Model Number: DEOSIN Controller board SPC-1 DIN R
Unit Type: lot (3 pieces/lot)
Package Size: 20cm x 15cm x 10cm (7.87in x 5.91in x 3.94in)
Package Weight: 0.6kg (1.32lb.)

Specifications

3pcs/lot Stepper Motor Controller Board SPC-1 Single Axis Stepper Motor Pulse Generator Super Anti-Noise Without Support Din Rail

 

 

Operating parameters:
 
Wide range of input voltage, DC 12-24 V,
Reverse polarity and short circuit;
Input: low effective;
Optimal s-type acceleration curve-run for 2000 rpm;
The maximum output frequency can reach 20 K, high-speed pulse output
Input and output of all high-speed optocouplers;
Built-in potentiometer and external potentiometer speed control can automatic circuit breaker;
There are various modes of control, easy to set up, very practical
 
 
 
 
 
 
Function:
 
1. S2, S1 both OFF: automatic return mode
Press the start button to run the motor forward to the positive limit, the motor reverse operation to the reverse limit is again.
So the cycle if not in the host computer set up the number of operations, it has been running.
Press the stop button to stop the motor at once.
2, S2, S1 are both ON: Point dynamic mode
Press the stop button to stop the motor is running.
Press the start button to start the motor to release the start button to stop the motor to stop running and run to the counter limit stop
3, S1 ON, S2 OFF :single round trip mode
Press the start button to reverse the motor running to the reverse limit stop, and then forward to the positive limit stop. Again
The second press continues to execute before the motion.
Press the stop button to stop the motor in the process of movement.
4. S1 OFF, S2 ON: single trigger mode.
Press the start button to stop the motor running to the reverse limit stop and then press the run to the forward limit stop so the loop
Press the stop button to stop the motor in the process of movement.
5, When switch the mode must cut off power first.
 
 
Video demonstration:
 
Please contact us for the video demonstration.
 
 
 
Mounting:
 
Copper studs fixed: board size 72 (W) mm X 60 (L mm) * high 28 mm (with 8 mm copper column),
Mounting hole 64 mm (W) X 50 (D) mm
 
 
Show application:
 
 
 
 
 

 

 
 
 
 
 

image

 

 

Tips to some customers:

  • Brazil: Please inform us the CNPJ(Company) or CPF(Private) after you placed the order.
  • Argentina: Please inform us your CUIT after you placed the order.
  • Russian: It's best to have a company name, or at least your full name.

 

image