CNC USB hand control link USBCNC jade woodworking engraving machine 4 axis 3 axis control card

 

Specifications:
 
The interface board has been revised many times, now is very stable and reliable without external power supply, increase the 5V regulated power supply module, using active crystal, won't appear software dropped, step motor step off, notebook battery can also be normal work.
Use 40 foot row insert single chip microcomputer, maintenance and replacement.
All use HT3.96 socket, wiring convenient.
The 3 output is directed, there is a direct control of the relay device.
Complete isolation can control the inverter.
An external manual interface, it is convenient to take over the control box.
Increase the power of self recovery insurance, protect the computer.
7 diodes, 10 electrolytic capacitors, 104 capacitor 7, 103102 one, 4700P/250V capacitor two are in order to stabilize.
The latest version of the software:
Can use plasma
You can use the 3D printer
You can use a man to export G code
Functional (set of regulated power supply, inverter spindle speed control, convenient wiring seat, external limiting, external tool, external origin. External I2C. external connection, external emergency, external reset, external relay, output instructions, work instructions, reset button, upgrade button, convenient, easy to use, easy to upgrade, use no limit. The price is low, the disc has detailed information.)
 
1.Works on MacOS X (Snow Leopard 10.6.3) with virtual machine emulating Windows XP SP3
2.USB (V2.x) from PC/Laptop running Windows XP, Vista or Windows 7 (32 bit or 64bit)
3.Motor driver connector pin-out is compatible with 10 pin open source interface (Linistepper, PICStep)
4.controller works with most step/dir stepper and servo motor drivers available on the market
5.buffered IO for maximum performance
6.advanced interpolation algorithms
7.start, stop, pause and resume execution of program on your machine
8.standard RS274/NGC G-code (EMC2 compatible)
9.advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported
10.advanced G-codes - G43, G49 (Tool Length Offsets) supported
11.advanced G-codes - G54, G59.3 (Coordinate System Origins) supported
12.tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-code
14.Profili 4-axes and 3-axes G-code supported
15. import toolpath from DXF files
16.import toolpath from PLT/HPGL files
17.import toolpath from image files
18.import toolpath from NC-Drill (Excellon) files
19.import toolpath from Gerber (RS-274X) files
20.toolpath simulation
21.automatic homing procedure
22.advanced toolchange procedures
23.automatic tool length measuring
24.export toolpath to G-code
25.export toolpath to DXF
26.SDK (software developers kit) is available
27.25 kHz maximum step frequency
28.3 digital outputs (flood, mist, spindle)
29.12 us minimum pulse width
30.manual jog inputs for all axes
31.limit inputs for all axes
32.control external devices with I2C protocol
 
 
Features:
 
You can run on XP Vista, Windows, or 7Windows PC 8 (32 bit or 64 bit Windows / laptop USB interface (2.x version))
Can be used in the market pulse / direction stepper motor and servo motor drive
Output input as the highest performance buffer
Advanced interpolation algorithm
Can start, stop, pause and resume your computer on the execution of the program
G RS274/NGC code (EMC2 compliant)
Supports advanced G- code - G40, G41, G42 (tool radius compensation)
Advanced G- code - G43, G49 (tool length compensation)
Support for advanced G code - G54, G59.3 (origin of coordinate system)
Supports 4 axis and 3 axis G code
You can import the tool path from the DXF file
You can import the tool path from the PLT / HPGL file
You can import the tool path from the image file
You can use the numerical control drill tool path file
Tool path simulation
Advanced tool for the exchange program
Automatic tool length measurement
Provide SDK (software development kit)
Can be externally defined key power
Can cut foam
The maximum frequency of 25 kHz
3 digital output (flooding, fog, spindle)
Minimum pulse width 12
All axes can be manually
All shafts can be connected to the limit
I2C protocol for controlling external devices
 
 
Package List:
1 * 4 Axis USBCNC 2.1 Substitute MACH3 Interface Board ---- MK1