• 1 x 24V/10A switching power supply
• 4 x 1 Axis TB6560  stepper motor driver
• 4 x 57BYGH78-401A stepper motor
• 1 x 5 axis breakout board
• 1 x DB25 parallel cable
• 1 x USB cable
• 4 x signal cables
• English user manual for 4 axis driver board will send by a CD or Email

 

5 axis breakout board

1.Full support for MACH3, KCAM4, EMC2, and support parallel port to control the host computer software;
2.Leads to all the parallel port 12 data transmission output pin, which can control the five stepper motor driver;
3.With 5-way input interface, can take the limit switch and emergency stop switch, reset, and the knife;
4.5 input LED indicates the status of the input;
5.With the way 12A relay control, normally open, normally closed leads, user-friendly connection;
6.Supply 5V USB power supply or external power supply to facilitate the access of external power supply;
7.On the external drive enable signal amplification, filtering, enhancement processing;
8.Pulse, the direction of signal shaping, enhanced load capacity, data transmission speeds reach 10 MBit / S;
9.Output pins with the expansion interface can 2.54mm pin 2.54mmXH-Block;

 

 

1 Axis Stepper Motor Driver

1.the use of new imported Japanese Toshiba TB6560 chip;
2.The base used dense teeth radiator, cooling super, to ensure the stable operation of equipment;
3.the input signal using a high-speed opto-isolation to ensure not losing steps, which the pulse direction signals with the same level of 6N137, dual high-speed optocoupler;

4.a variety of semi-flow mode and the semi-flow current selection, the use of more flexible
5.Decay mode is adjustable to ensure the motor running smooth;
6.Compact Dimensions, cooling pad size: 75mm * 65mm, four mechanical installation positioning hole size is: 67mm * 58, mounting hole diameter is 4mm
7.Set method detailed table on the board, easy to use;
8.With anti-reverse circuit, even if not careful the power plug back and will not burn the chip, it's very safe to use.

 

stepper motor

 

Model	57HS76
Number of phases	2-phase
Number of lines	4-wire
Phase voltage	3.08v
Phase current	3A
Torque	1.8N.M
Shaft Diameter	8mm
Axial length	21mm
Side length	57mm
High	76mm
Weight	1100g

 

RED:         A+

BLUE:        A-

GREEN:      B+

BLACK:      B-

Switching power supply

 

1.the range of AC input voltage is changed by the switch
2.high-efficiency, high reliability

3.100% full load burn-in test

4.Protections: Short circuit / overload / over voltage / over temperature

5.built-in cooling DC fan control

6.Working frequency is 25 kHz

7.1 year warranty

8.Weight: 0.93 kg

• if you have any problems of payment,please contact us!
• If you need to buy more goods, but the price is not very cheap, please contact us!

•  All products have been checked and packaged in good condition before dispatch.
•  All products have 1 year warranty.
•  If you are not satisfied with our product and service. Please contact us first before giving a non positive feedback or dispute. we will try to our best to solve the problems.

• Please be sure that the address you give is correct.If the address is incorrect, the parcel fail to delivery and is sent back to the seller ,the buyer should pay for the first and returning shipping fees.

• We ship to worldwide and declare lower value for customs.

• Most orders ship within 3-5 business days on payment received (Except Holiday).

• Item shipped from China Mainland using airmail by FEDEX,UPS,DHL,EMS or China Post air mail.

• China post delivery time depends on destination and other factors, it may takes up to 20-30 business days.(Brazil  would take more than 60 days,because of the local customs.

• All message or emails will be answered within 1 business day !

• Your satisfaction is our goal,please leave 4 or 5 star feedback .Much appreciation in advance.

• Negative feedback does not solve anything .When any problems,please must contact us first.We will try our best to slove any problems ASAP and provide you with the best Customer Service.