TB6600-2 4.5A stepping motor driver 12-36V supply alternative TB6560 for cnc router

 

Specifications:

PWM chopper-type bipolar stepping motor driver IC

TB6600HQ / HG is a single-chip PWM bipolar sinusoidal chopper type stepper motor micro step drive.

Can control the 2-phase stepper motor in forward and reverse rotation,

Phase with a 1-2, W1 -2 phase 2W1 -2 phase, 4W1 -2-phase excitation mode.

Just a clock signal can be driven by two-phase bipolar stepper motor to achieve low vibration, high efficiency work.

 

Features:

• Single-chip bipolar sinusoidal micro step motor driver

• Latest BiCD 0.13 nm Process

• withstand voltage up to 50V

• ON resistance (upper + lower) = 0.4 Ω

• Forward and reverse rotation control

• 5 kinds of sub-modes can be selected (1/1, 1/2, 1/4, 1/8, 1/16 step)

• output current: IOUT = 5.0A (peak within 100ms)

• Rated output: IOUT = 4.5 A

• Package: HZIP25 - 1.00F

• input pull-down resistor: 100 KΩ

• Current output alarm pin: Ialert = 1mA

• Monitoring output pin (MO): Imo = 1mA

• with reset and enable pins

• With standby function.

• break the traditional single-supply operation

• Built-in thermal protection (TSD) circuit

• Built-in voltage protection (UVLO) circuit

• Built-in over-current detection (ISD), the circuit