| Brand Name: | FTDCNTOP |
|---|---|
| Model Number: | 2HSS86H |
| Motor Type: | Stepper Motor |
| Power Supply: | AC |
| Unit Type: | piece |
| Package Size: | 50cm x 20cm x 10cm (19.69in x 7.87in x 3.94in) |
| Package Weight: | 1.0kg (2.20lb.) |
Quick Details
Specifications
2 phase Closed loop Step servo driver for NEMA34 NEMA42 motor 60V-80VAC 6A JMC 2HSS86H
- Full closed loop control
- Motor with standard 1000 line encoder
- It save energy and achieve nearly 100% output torque .
- Micro step setting range is 2-256
- High speed response , High speed
- Optical isolation fault alarm output interface ALM
- Current loop bandwidth: (-3dB) 2KHz (typical value)
- Speed loop bandwidth: 500Hz (typical value)
- Position loop bandwidth: 200Hz (typical value)
- RS232 serial communication available to download or change the parameters
- Optical isolation fault alarm output interface ALM
- Over current, I2T, over voltage, under voltage,temperature, speeding, over-differential protection
- Alarm clear input ENA
Typical applications:
CNC machine ,cutting machine ,engraving machine
Introduction
2HSS86H two-phase hybrid stepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which include current loop,speed loop and position loop.This product has the advantage of both step and servo system, and it’s a highly cost effective motion control products.
Electrical Specifications
| Parameters | Min | Typical | Max | Unit |
| Supply voltage | 30V | 60V | 75V | VAC |
| Output Current (Peak) | - | - | 8.0 | Amps |
| Logic Input Current | - | 10 | - | mA |
| Pulse input frequency | - | - | 200 | KHz |
| Low Level Time | 2.5 | - | - | µsec |
Environment
| Cooling | Natural Cooling or Forced Convection | |
| Environment | Storage Space | Avoid dust, oil frost and corrosive gases |
| Ambient Temperature | -20°C -+80°C | |
| Humidity | <80%RH | |
| Vibration | 5.9m/s² Max | |
| Storage Temp. | -20°C - +80°C | |
| Weight | Approx. 580 gram | |
Microstep Resolution Setting
| SW3 | SW4 | SW5 | SW6 | |
| Default | ON | ON | ON | ON |
| 800 | OFF | ON | ON | ON |
| 1600 | ON | OFF | ON | ON |
| 3200 | OFF | OFF | ON | ON |
| 6400 | ON | ON | OFF | ON |
| 12800 | OFF | ON | OFF | ON |
| 25600 | ON | OFF | OFF | ON |
| 51200 | OFF | OFF | OFF | ON |
| 1000 | ON | ON | ON | OFF |
| 2000 | OFF | ON | ON | OFF |
| 4000 | ON | OFF | ON | OFF |
| 5000 | OFF | OFF | ON | OFF |
| 8000 | ON | ON | OFF | OFF |
| 10000 | OFF | ON | OFF | OFF |
| 20000 | ON | OFF | OFF | OFF |
| 40000 | OFF | OFF | OFF | OFF |
Input edge settings
* SW1 : Dialing Switch checking Input edge settings .
* OFF=Rising edge effective , ON= falling edge effective
Logical direction setting
* SW2:When dialing switch SW2 switches ON or OFF , it can change the present running direction of motor
* OFF=CCW , ON=CW
ALM and PEND signal output ports
| Port | Symbol | Name | Remark |
| 1 | PEND+ | In position signal output + |
|
| 2 | PEND- | In position signal output - | |
| 3 | ALM+ | Alarm output + | |
| 4 | ALM- | Alarm output - |
Control signal input port
| Port | Symbol | Name | Remark |
| 1 | PLS+ | Pulse signal + | Compatible with 5V or 24V |
| 2 | PLS- | Pulse signal - | |
| 3 | DIR+ | Direction signal+ | Compatible with 5V or 24V |
| 4 | DIR- | Direction signal- | |
| 5 | ENA+ | Enable signal + | Compatible with 5V or 24V |
| 6 | ENA- | Enable signal - |
Power Interface Ports
| Port | Identification | Symbol | Name | Remark |
| 1 |
Motor Phase Wire Input Ports | A+ | Phase A+(Red) | Motor Phase A |
| 2 | A- | Phase A- (Blue) | ||
| 3 | B+ | Phase B+(Green) | Motor Phase B | |
| 4 | B- | Phase B-(Black) | ||
| 5 |
Power Input Ports | VCC | Input Power + |
AC24V-70V DC30V-100V |
| 6 | GND | Input Power- |
Encoder Feedback Signal Input Ports
| Port | Symbol | Name | Wiring color |
| 1 | PB+ | Encoder phase B + | Blue |
| 2 | PB- | Encoder phase B - | White |
| 3 | PA+ | Encoder phase A + | Yellow |
| 4 | PA- | Encoder phase A - | Green |
| 5 | VCC | Input power | Red |
| 6 | GND | Input power ground | Black |
Payment
1. If you have any difficulty in paying your items, pls contact us first and we will soon help to solve it.
Shipping
1. Rule all items will be shipping within 3-5 business days after you placed order.
2. UPS/DHL/FedEX express shipping usually takes 3-7 working days depended on the country delivered to. We will choose the best and most suitable shipping for you.
3. Customer should pay for the custom fee in any case.
4. We are not responsible for any accidents, delay or other issues that are the responsibility of the shipping service.
Warranty& Return Policy
1. The items are ALL BRAND NEW .All products have been checked and packaged in good condition before dispatch.
2. You have 14 days to return the items from the date they were received. If the items are your possession more then 14 days, we would provide the 12 months Manufacturer’s for defective items.
3. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and your ID.
4. Return shipping is to be paid by the buyer.