| Motor Type: | Stepper Motor |
|---|---|
| Model Number: | FYQM1106A |
| Unit Type: | piece |
| Package Size: | 25cm x 20cm x 18cm (9.84in x 7.87in x 7.09in) |
| Package Weight: | 1.1kg (2.43lb.) |
Quick Details
Specifications
Quick Details
Place of Origin: Guangdong, China (Mainland) Brand Name: Xfoyo
Model Number: FYQM1106A Motor Type: Stepper Motor
Color: Black Voltage: DC48-130V, AC36-110V
Driving current: 2.5-6.0A/phase 8grade to choose Subdivision: Maximum resolution: 12800 steps/turn,6 grade to choose
Maximum pulse frequency: 200Kpp
Product features
1 High performance,low price,low noise,good stability
2. H-Bridge bi-phase constant subdivide drive and control Circuit
3. Driving current can be adjusted from2.5A-6.0A continuously
4. When the pulse stops more than 100ms, the coil current is automatically halved.
5. Frequency of pulse response most up to 200Kpps
6. Over current, over voltage, under voltage, short circuit protection function
7. Low repair rate, high reliability
8. It suit for the stepper motor which outside diameter in 56-110mm
Application area
Suitable for the automation equipment and instruments of the field of kinds of motion control area. For example: Electronic equipment, semiconductor equipment, laser cutting and welding, paster, packaging machinery, engraving machine, marking machine, cutting machine, apparel plotter, numerical control machine, automated assembly equipment ,act. They are the first chosen for the customs in low noise, low vibration and high response.
Notice:
1 Prohibit connect the power supply reversely, the input voltage should not exceed DC130V. Green indicator light PWR is bright when the driver is powered on.
2. The input control signal voltage is 5V, should be connect the Current limiting resistance when the control signal voltage above 5V.when the control signal voltage get to 24V should be concatenation the resistance in 2.2K 1/4W.
3.Fault indicator light flashing when the current is too full , please check the motor connection and other short circuit faults whether Voltage too low. If it occurs the motor wiring or other short circuit faults, resolve the accident, to re – energized.
4. SW4 is used to setting the functions in lock mode: ON=Full current, OFF=Half Current. SW4 in factory default setting is ON, which reduces the heating of the motor and drive, improve the safety. After the pulse train stopped about 100milli-second , the electric current is reduced by 50%automatically.
5. The driver has a function that in single and double pulse selection, it can be selected by the internal Short circuit stick. Factory default setting : Pulse + direction. The dial switch SW1-SW8 will need to be re energized to be effect
Payment
if you have any problems of payment please contact us!
if you need to buy more goods but the price isnotvery cheap please contact us!
Warranty
All products have been checked and packaged in good condition before dispatch.
ALL peoducts have 1yeas warranty.
If you are not satisfied with our product and service.Please contact us first before giving a non positive feedback or dispute.we will try to our best solve the problems
