Feature(Compare With traditional stepping, AC servo):

1. Will not happen lost step phenomenon, to ensure accurate positioning of the motor
2. High-speed performance increased by about 30%, improve equipment speed
3. When the motor is working, the heat is reduced by 20% and the motor torque is reduced
4. Motor vibration is reduced, the operation is more stable
5. The use of variable current control technology to save power consumption
6. No need for complex parameter adjustment, the use of more convenient
7. When the high speed stops without jitter, the zero speed stops steadily
8. Position response fast, especially for short-range fast start and stop occasions
9. The torque is larger and the installation size is smaller  
10. Cost savings of more than 50%

Description (HBS1108S)

1. Voltage input range: 70-130 VAC
2. Maximum peak current: 8A
3. Subdivision range: 200 ~ 51200ppr
4. Signal input: differential / single-ended, pulse / direction, Signal level: 5-24V compatible
5. Optical isolation signal input, anti-interference ability
6. Impulse response frequency: 200KHz
7. External digital debugging panel for easy parameter setting and monitoring
8. Serial communication function, current, subdivision can be adjusted, signal edge, alarm output logic and other functions adjustable
9. Closed-loop vector control to ensure that the motor high-speed large torque output, while ensuring that the motor does not lose step
10. Variable current control, motor heating greatly reduced
11. Ultra - low vibration noise
12. With over-voltage, over-current, tracking error tolerance and other protection functions
13. Small size, saving installation space

Parameter(HBS1108S)

Parameter	Min	Typical	Max	Unit
Input Voltage	70	90	110	VAC
Output Current	-	-	8.0(Peak)	A
Pulse Input Frequency	0	200	300	kHz
Logic Signal Current	7	10	16	mA
Alarm output logic current	-	-	100	mA
insulation resistance	100	-	-	MΩ

86HBM80H-1000:

Model	Current (A)	Holding Torque	Rotor inertia	Weight (kg)	Motor length
86HBM80H-1000	4.8	8.0N.M	2.8 kg·cm²	4.0	140mm

General specification:

Temperature rise	80K
Use environment	temperature:-10~+50℃;humidity:85% MAX
Insulation grade	B
insulation resistance	100MΩ MIN 500VDC
voltage resistance	1000VAC   1min
Radial runout	0.025 mm MAX (load 5N)
Axial runout	0.075 mm MAX (load 10N)

Include:

1 x HBS1108S Drive

1 x 86HBM80H-1000 2phase Stepper Motor

1 x 8m Coding line