| Motor Type: | DC Motor |
|---|---|
| Model: | 28BYJ-48 |
| Resistance: | 35 Ohm |
| Stepping angle: | 5.625 / 64, the gear ratio 64 |
| Voltage: | 5V |
| Drive mode: | 1-2 phase excitation |
| Unit Type: | lot (10 pieces/lot) |
| Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
| Package Weight: | 2.0kg (4.41lb.) |
Quick Details
Specifications
Real picture was taken:
Stepper motor Description:
Diameter: 28mm
Voltage: 5V
Stepping angle: 5.625 x 1/64
Reduction ratio: 1/64
Power consumption: approximately 5V / 63mA
No-load pull into the frequency:> 500Hz
No-load pull frequency:> 900Hz
5-wire 4-phase drive with an ordinary chip ULN2003A
Driver board Description:
Dimensions: 16 × 28mm, maximum 10mm, compact size, sophisticated technology
Use ULN2003A power Darlington chip stepper motor drive
A, B, C, D LED indicates the status of the four-phase stepper motor at work
Stepper motor with a standard interface, when used directly pluggable
With 3mm diameter screw holes for easy assembly using fixed
Interface Description: VCC and GND power input range of 5-24V, IN1-IN4 the corresponding test program 51 MCU P0.0-P0.3
