Description:

• Very easy to use, no instructions, all of use are marked on the board
• Definitely use the new chips imported from Japan, Toshiba TB6560
• With large heat sink to ensure good heat dissipation
• Input signal high-speed optocoupler isolation, guarantee not losing steps
• Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function
• Attenuation model adjusted for all the motors can be locked when no noise
• Ultra-small, the overall size: 62mm * 75mm, installation of four mechanical positioning hole size: 65mm * 55, hole size φ3mm
• The form of stud-type connectors and an optional plug-in 
  Specification
• Rated voltage: DC 12V-24V
• Maximum current: 3A-3.5A
• Current adjustable (Current Settings):0.5A, 1A, 1.5A, 1.8A, 2A.2.5A, 3.5A
• Refine your adjustable (Excitation Mode):1,2,8,16
• Attenuation adjustable (Decay Mode):
  0% ---- no decay mode
  25% --- slow decay mode
  50% --- Normal mode.
  100% - fast decay mode
• Adjust the decay mode to match the type of motor impedance, thereby eliminating the jitter noise when the stepper motor is locked and the motor during exercise.
  Automatic half current setting (Torque Settings):
  20% ---- no pulse current is reduced to the normal operating current 20%
  50% ---- no pulse current is reduced to the normal operating current 50%
  75% ---- no pulse current is reduced to the normal operating current 75%
  100% --- no pulse current is reduced to the normal operating current 100%

Package including:

• 1 Axis 3A TB6560 Stepper Motor Driver x 1