| Model Number: | DLCL |
|---|---|
| Motor Type: | AS DESCRIPTION |
| Unit Type: | piece |
| Package Size: | 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in) |
| Package Weight: | 0.02kg (0.04lb.) |
Quick Details
Specifications
motor drive TB6612FNG module High performance Ultra small volume 3PI matchingmotor drive
TB6612FNG module
High performance
Ultra small volume
3PI matching
Colour:blue+green
size:18*10mm
Material:metal
This module is compared with the traditional L298N efficiency improved a lot, the volume is greatly reduced in the rated range, chip basic heat, so we suggest you have a certain ability to use a friend, you must be careful connection carefully, pay attention to positive and negative polarity.
The use of TB6612:TB6612 is dual drive, that is, you can drive two motorsThe following are the IO ports that control the two motorsSTBY port of the microcontroller IO port cleared, the motor all stopped, set 1 by AIN1, AIN2, BIN1, BIN2 to control the positive and reverseVM power supply within 12VVCC connected to 5V power supplyGND won't say any moreDrive 1PWMA connects the PWM port of the microcontrollerTruth table:AIN1 001
AIN2 010
Stop the reverse
A01AO2 connect the two legs of the motor 1Drive 2PWMB connects the PWM port of the microcontrollerTruth table:BIN1 001BIN2 010Stop the reverse
B01BO2 connect the two legs of the motor 2.
Package Contents: 1 x Balance car module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
TB6612FNG module
High performance
Ultra small volume
3PI matching
Colour:blue+green
size:18*10mm
Material:metal
This module is compared with the traditional L298N efficiency improved a lot, the volume is greatly reduced in the rated range, chip basic heat, so we suggest you have a certain ability to use a friend, you must be careful connection carefully, pay attention to positive and negative polarity.
The use of TB6612:TB6612 is dual drive, that is, you can drive two motorsThe following are the IO ports that control the two motorsSTBY port of the microcontroller IO port cleared, the motor all stopped, set 1 by AIN1, AIN2, BIN1, BIN2 to control the positive and reverseVM power supply within 12VVCC connected to 5V power supplyGND won't say any moreDrive 1PWMA connects the PWM port of the microcontrollerTruth table:AIN1 001
AIN2 010
Stop the reverse
A01AO2 connect the two legs of the motor 1Drive 2PWMB connects the PWM port of the microcontrollerTruth table:BIN1 001BIN2 010Stop the reverse
B01BO2 connect the two legs of the motor 2.
Package Contents: 1 x Balance car module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
