Encoder 600P/R Incremental Rotary Encoder AB phase encoder 6mm Shaft With coupling

Model: incremental rotary encoders , AB two phases . By rotating the grating disk and optocoupler direction which generate counting pulses.

 

Performance : 600P/R-600 pulses per revolution . DC 5-24V power supply. Maximum mechanical speed of 6000 rev / min , the response frequency :0-20KHz;

 

Size:

Encoder size : 39 × 35.5mm; shaft 6 × 13mm; axis stopper platform : High 5mm, 20mm; fixed empty as: three 3mm screw holes distribution of 120 degrees or six 3MM screw holes into 60 degree distribution, to the center distance of 14mm;

 

Output : AB two -phase quadrature output rectangular pulse , the circuit output is NPN open collector output type , the output of this type can and with internal pull-up resistor is directly connected MCU or PLC , such as 51 single or Mitsubishi PLC (PLC input mode should be connected to 0V switch function ) , Note: If the encoder is not connected to the device can not be directly oscilloscope oscilloscope ( open collector output without pull-up resistor when there is no voltage output ) If you want the oscilloscope in AB two-phase output with two pull-up resistors ;

 

Uses : means for measuring the rotational speed of the object , angle, acceleration, and length measurement.

 

Use: suitable for a variety of intelligent control displacement measurement , automatic fixed-length automatic guillotine paper machine, steel cut length control , civilian measured height human scale, students racing robots .

 

Features: small size , light weight , easy installation , high cost of significant advantages.

 

connection: Green = A phase, white = B phase, red =  power +, black = power -

 

Wiring Output : A phase, B phase , Vcc positive supply , V0 , the shield wire.

 

Note : AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor.