| Motor Type: | Stepper Motor |
|---|---|
| Unit Type: | piece |
| Package Size: | 15cm x 13cm x 12cm (5.91in x 5.12in x 4.72in) |
| Package Weight: | 0.5kg (1.10lb.) |
Quick Details
Specifications
Package Includes
1xMACH3 interface board
Product Description
Features
The interface board has been specially designed with the general interface board different places as follows:
Super-board 4-axis interference limit circuit. X +, X-, Y +, Y-, Z +, Z-, 4 +, 4-, each limit point is shorted to ground, the limit is triggered. This limit does not take the parallel circuit resources. You can also hop cap plate associated with the P10 port. In the trigger limit to + side, no matter how your computer operation, the motor can no longer + direction. To support only computer - side motion. + Until the end of the limit is not triggered, the machine can again + exercise. We connect this intelligent limit circuit, novice do not worry about the collision of the machine. So that the machine get better and more comprehensive protection.
XYZ4 board the four-way motor control signal, the whole road use OC transistor output. Drive capacity 200MA. A port can be connected simultaneously and 10 road motor drive, or simultaneously drive four relays, the drive capability of the whole Taobao strongest.
On-board interfaces with a dedicated stop button, regardless of what action the computer, as long as the button for two short lines, spindle, XYZ4 each axis will stop. Integrated charge pump function. All input interface has a light indicator. Each axis has run indication.
1, the output of the input signal by the number of full-dedicated high-speed processing chip, the signal correction, amplification, removes unnecessary interference signal, so that machine run more stable.
2, the computer's LPT port power supply and other parts of the isolated power supply, so that between the computer and the machine can effectively isolate. Thus further ensuring the security and stability. Make computers and data more secure machining
3, a total of five input signals to communicate with the host computer, all via the optical coupling isolation, including P11, P12 port is the high-speed optical coupling isolation, can be used to access the spindle encoder, hand wheel or A, B equal demanding signal. Set aside a 12V-OUT, 5V-OUT power output interface can be used to access the Hall sensor switch, close to these needs power switch. There are five input ports can be set to: limit the origin of the knife, start, stop, spindle speed input, MPG input, etc. any of which five functions.
4, a total of 12 output signals are available. It can support up to 6 axis control output. You can only choose one of these or several axes to control. This 12 outputs some are functional reuse. In use, an output port can only be used when a function.
5, there are three ad hoc support MACH3 software programmable control relays. By controlling the MACH3 software, you can control any one of the relay on and off. Each relay has energized lights, more intuitive use, easy to use. The three relays can be used to control the liquid coolant, the coolant mist, gas liquid coolants hoist. It can also be used to control devices such as solenoid valve power switch. These relays can be controlled via M commands. M3, M4 spindle control reversing, M5 stop the spindle. M7 control water cooling, M8 control cold air or fog. M9 stop cooling operation.
6, ad hoc high-speed optical coupling isolation to control the spindle speed. Within 2.5KHZ can output PWM signal (frequency PWM computer motherboard configuration of a relationship), an output port for the parallel port P1. This interface board has a PWM converted 0-10V of a D / A circuits. 0-10V output level can be controlled to some of the market Only analog speed control inverter. To control the spindle speed. It is noted that the PWM output with 0-10V output can only choose one. It can not be used simultaneously.
7, the interface board can be connected to a common anode output stepper drives or servo drives (servo drive must support digital signal). Output is 5V level signal. Each output is NPN transistor OC outputs. Its sinking 200MA. Can drive 4 relays or 10 stepper drives or servo drives. Its ability to drive the whole Taobao strongest. In addition, if you want to drive more than five relay, then you can not use this interface board USB-powered ways to use isolated power supply module, if so required, please contact customer service.
8, wide input supply voltage: 15-32VDC supply.
Payment
if you have any problems of payment please contact us!
if you need to buy more goods but the price isnotvery cheap please contact us!
Warranty
All products have been checked and packaged in good condition before dispatch.
ALL peoducts have 1yeas warranty.
If you are not satisfied with our product and service.Please contact us first before giving a non positive feedback or dispute.we will try to our best solve the problems.
