| Model Number: | SZS-GTFS-G008908 |
|---|---|
| Motor Type: | other |
| Unit Type: | piece |
| Package Size: | 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in) |
| Package Weight: | 0.042kg (0.09lb.) |
Quick Details
Specifications
Drive Part of the Peak Current: 2A Logic Terminal Power Supply: +5 V ~ +7 V (Power supply within the board: +5 V) Logic Part of the Operating Current: 0 ~ 36mA Control Signal Input Voltage Range: Low:-0.3V; High: 2.3V Drive Part of the Peak Current: 2A
Logic Terminal Power Supply: +5 V ~ +7 V (Power supply within the board: +5 V)
Logic Part of the Operating Current: 0 ~ 36mA
Control Signal Input Voltage Range: Low:-0.3V; High: 2.3V
The Dual H-Bridge Motor Driver module Board, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.
Drive Terminal Power Supply: +5 V ~ +35 V;
(if others need to be powered by the board, power supply should be +7V~+35V)
Enable Signal Input Voltage Range: Low: -0.3;
High: 2.3V
Storage Temperature: -25 ~ +130 deg C
Other Extensions: Control indicators, logic unit power supply interface
Size(L x W x H): 55 x 60 x 30mm
Package Includes: 1 x L298N Stepper Motor Driver Controller Board Module
Waring:
Because of the fin size, in the high voltage, high current usage, please use the means of forced cooling
Power is limited by the 78M05, if the driver is more than 15V motor, please use the external 5V power supply.
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Logic Terminal Power Supply: +5 V ~ +7 V (Power supply within the board: +5 V)
Logic Part of the Operating Current: 0 ~ 36mA
Control Signal Input Voltage Range: Low:-0.3V; High: 2.3V
The Dual H-Bridge Motor Driver module Board, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.
Drive Terminal Power Supply: +5 V ~ +35 V;
(if others need to be powered by the board, power supply should be +7V~+35V)
Enable Signal Input Voltage Range: Low: -0.3;
High: 2.3V
Storage Temperature: -25 ~ +130 deg C
Other Extensions: Control indicators, logic unit power supply interface
Size(L x W x H): 55 x 60 x 30mm
Package Includes: 1 x L298N Stepper Motor Driver Controller Board Module
Waring:
Because of the fin size, in the high voltage, high current usage, please use the means of forced cooling
Power is limited by the 78M05, if the driver is more than 15V motor, please use the external 5V power supply.
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
