| Motor Type: | Stepper Motor |
|---|---|
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
| Package Weight: | 0.1kg (0.22lb.) |
Quick Details
Specifications
NodeMCU Lua CH340G ESP8266 ESP- 12 WIFI Internet Development Board with CH340 Micro-USB interface.
Module integrates 3.3V regulator, GPIO, PWM, IIC, 1- Wire and ADC all in one board.
Plug and Play, program your ESP8266 from the Arduino IDE.
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self- contained Wi- Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self- contained Wi- Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
Product details: WIFI Wireless Transceiver Module
LWIP agreement
Supports 3 modes: AP,STA,AP+STA
802.11 b/g/n
Pin header spacing: 0.1" (2.54mm)
High efficiency AT commands, simple for your development.
Dimensions: 60mm x 32mm
LWIP agreement
Supports 3 modes: AP,STA,AP+STA
802.11 b/g/n
Pin header spacing: 0.1" (2.54mm)
High efficiency AT commands, simple for your development.
Dimensions: 60mm x 32mm
Package contains:
1 x ESP-12F WIFI Wireless Development Board
Important note: this is a 3.3V module, ensure it is only connected to the 3V lines on your micro- controller, direct 5V will damage the module.
1 x ESP-12F WIFI Wireless Development Board
Important note: this is a 3.3V module, ensure it is only connected to the 3V lines on your micro- controller, direct 5V will damage the module.
In addition to the 3.3V power supply for the module, 5V TTL data lines also need to be shifted to 3.3V. When using the module with a 5V micro- controller, such as a standard Arduino, ensure to use a level shifter on the URXD pin - a simple resistor-zener level shifter or voltage divider is sufficient. Again, this is to prevent over-voltage.
This development board includes the necessary voltage regulation and level- shifting so you can just plug the development board into your computer.
This development board includes the necessary voltage regulation and level- shifting so you can just plug the development board into your computer.
USB-TTL included, plug&play
10 GPIO, every GPIO can be PWM, I2C, 1-wire
FCC CERTIFIED WI-FI module(Coming soon)
PCB antenna
