| Motor Type: | AS DESCRIPTION |
|---|---|
| Unit Type: | piece |
| Package Size: | 18cm x 9cm x 4cm (7.09in x 3.54in x 1.57in) |
| Package Weight: | 0.137kg (0.30lb.) |
Quick Details
Specifications
after enable ENA ENB Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.
Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled
L298N is a kind of high voltage,high current motor driver chip produced.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V),large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.
Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.
It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well.
Colour:red
Material:ABS
This module can use built-in 78M05 for electric work via a driving power supply part.
This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V, it can enable the onboard 5V logic power supply;afterthe power supply,don't input voltage in the interface+5V power supply,but you can lead the 5V for external use.
when ENA enable IN1 IN2 control OUT1 OUT2
when ENB enable IN3 IN4 control OUT3 OUT4
Applied cases:Driving stepper motor
Package Contents:5 X L298N Motor Drive Controller Module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
after enable ENA ENB Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.
Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled
L298N is a kind of high voltage,high current motor driver chip produced.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V),large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.
Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.
It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well.
Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled
L298N is a kind of high voltage,high current motor driver chip produced.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V),large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.
Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.
It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well.
Colour:red
Material:ABS
This module can use built-in 78M05 for electric work via a driving power supply part.
This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V, it can enable the onboard 5V logic power supply;afterthe power supply,don't input voltage in the interface+5V power supply,but you can lead the 5V for external use.
when ENA enable IN1 IN2 control OUT1 OUT2
when ENB enable IN3 IN4 control OUT3 OUT4
Applied cases:Driving stepper motor
Package Contents:5 X L298N Motor Drive Controller Module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
after enable ENA ENB Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.
Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled
L298N is a kind of high voltage,high current motor driver chip produced.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V),large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.
Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.
It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well.
|
Shipment:
When you place an order, please choose a shipping method and pay for the order including the shipping fee. We will send the items within 7 days once your payment is completed.
We do no guarantee delivery time on all international shipments due to differences in customs clearing times in individual countries, which may affect how quickly your product is inspected. Please note that buyers are responsible for all additional customs fees, brokerage fees, duties, and the taxes for importation into your country. These additional fees may be collected at time of delivery.
We will not refund shipping charges for refused shipments.
The shipping cost does not include any import taxes, and buyers are responsible for customs duties.
Returns:
We do our best to serve our customers the best that we can.
We will refund you if you return the items within 15 days of your receipt of the items for any reason. However, the buyer should make sure that the items returned are in their original conditions.
If the items are damaged or lost when they are returned, the buyer will be responsible for such damage or loss, and we will not give the buyer a full refund.
The buyer should try to file a claim with the logistic company to recover the cost of damage or loss. The buyer will be responsible for the shipping fees to return the items.
Warranty & Maintenance:
We offer the 1-month free replacement.
Buyers may request for a replacement within 15 days from your receipt of the product.The buyer should return the product in the original conditions to us and should bear the shipping costs for return.
We also provide 12monthfree maintenance. The buyer should return the product in the original conditions to us and should bear the shipping costs for return.
If any part is required to be replaced, the buyer should also pay for the costsof the parts to be replaced.
Before returning the items, please confirm the return address and the logistics method with us. After you give the items to the logistic company, please send us the tracking number.
As soon as we receive the items, we will repair or exchange them ASAP.
Feedback:
Your satisfaction and positive feedback is very important to us.
Please leave positive feedback and 5 stars if you are satisfied with our items and services. If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback. We will do our best to solve any problems and provide you with the best customer services.