TB6560 3A-4 stepper motor driver stepper motor driver board single-axis current controller 10 files for cnc router

 

Specifications:

 

Rated voltage: DC 12V-24V

Maximum current: 3.5A

Current adjustable (Current Settings): 0.5A, 1A, 1.5A, 1.8A, 2A.2.5A, 3.5A

Adjustable subdivision (Excitation Mode): 1,2,8,16

Adjustable attenuation (Decay Mode):

0% ---- No decay mode

 

25% ---- Slow decay mode

 

50% ---- Normal mode

 

100% ---- Fast decay mode

 

----- By decay mode adjustment can match different motor impedance, thereby eliminating the noise and movement motor stepper motor is locked in the jitter.

 

Automatic semi-flow settings (Torque Settings):

20% ---- no pulse current is reduced when the normal operating current 20%

50% ---- no pulse current is reduced when the normal operating current 50%

75% ---- no pulse current is reduced when the normal operating current 75%

100% ---- no pulse when the current drops to normal operating current 100%

 

Features:

 

1. very easy to use, no instructions, all use are marked on the board

2. Absolute using the new chips imported Toshiba TB6560

3. With large heat sink to ensure good heat dissipation

4. Input signal high-speed optocoupler isolation, guarantee not losing steps

5. Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function

6. decay mode adjustable, no noise can be done when the motor locked for all

7. The ultra-small size, overall dimensions: 62mm * 75mm, installation of four mechanical positioning hole size: 65mm * 55, hole size is Φ3mm

8. The form of stud connectors and plug type optiona