Model Number: | TB6560 |
---|---|
Motor Type: | Stepper Motor |
Unit Type: | piece |
Package Size: | 15cm x 10cm x 10cm (5.91in x 3.94in x 3.94in) |
Package Weight: | 0.7kg (1.54lb.) |
Quick Details
Specifications
TB6560 four-axis stepper motor drive axis cnc router drive cnc mach3 drive
Features:
· Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset
· 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!
· Adjustable drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
· Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment
· On board current switching - Power output can be set according to specific user requirement
· Full closed-type optical isolation to protect the user's computer and equipment
· Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
· 4 channel inputs interface- Can be used for XYZ limit and emergency stop
· Professional design - Two stage signal processing with super anti-jamming
· Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect
· Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop
· Universal architecture - Supports most parallel software MACH3, KCAM4, EMC2 etc!
Dip settings:
Current Setting | 1 | 2 | Decay Mode Settings | 3 | 4 | MicroStep Settings | 5 | 6 |
100% | ON | ON | FAST | ON | ON | 1 | ON | ON |
75% | OFF | ON | 25% | ON | OFF | 1/2 | ON | OFF |
50% | ON | OFF | 50% | OFF | ON | 1/8 | OFF | OFF |
25% | OFF | OFF | SLOW | OFF | OFF | 1/16 | OFF | ON |