stepping motor driver TB6600 4.5A 12-36V supply alternative
 

Specifications:

MACH3 CNC software used to run the host computer (LPT port) and signal processing peripheral portion of the electric power tool. It can be applied: CNC engraving machine, CNC lathe, CNC plasma cutting machine, laser engraving machine, CNC milling machines, machining centers and other machine tools. MACH3 series with the host computer and software, making numerical control system is the most cost-effective.

Features:

1, the output of the input signal by the number of full-dedicated high-speed processing chip, the signal correction, amplification, removes unnecessary interference signal, so that machine run more stable.

 2, the computer's LPT port power supply and other parts of the isolated power supply, so that between the computer and the machine can effectively isolate. Thus further ensuring the security and stability. Make computers and data more secure machining.

 3, a total of five input signals to communicate with the host computer, all via the optical coupling isolation, can be set to: limit the origin of the knife, start, stop, spindle speed input, MPG input, etc. any of which five functions.

 4, a total of 12 output signals are available. It can support up to 6 axis control output. You can only choose one of these or several axes to control. This 12 outputs some are functional reuse. In use, an output port can only be used when a function.

 5, there are three ad hoc support MACH3 software programmable control relays. By controlling the MACH3 software, you can control any one of the relay on and off. Each relay has energized lights, more intuitive use, easy to use. The three relays can be used to control the liquid coolant, the coolant mist, gas liquid coolants hoist. It can also be used to control devices such as solenoid valve power switch.

 6, ad hoc high-speed optical coupling isolation to control the spindle speed. Within 2.5KHZ can output PWM signal output port P1 for the parallel port. This interface board has a PWM converted 0-10V of a D / A circuits. 0-10V output level can be controlled to some of the market Only analog speed control inverter. To control the spindle speed. It is noted that the PWM output with 0-10V output can only choose one. It can not be used simultaneously.

 7, the interface board can be connected to common cathode or common anode output to stepper drives or servo drives (servo drive must support digital signal). 5V output level.

 8, wide voltage input supply: 9-35VDC supply.

 9, special specifications can be customized interface board.




Shipping list:

1,6 axis interface board a

2, USB data line

3, MACH3 software, the software generates a path (send mail)