LINALaboratory Intermeshing Type Rubber Kneader Machine'sMixing effect is optimized by well-designed rotors, top and down rams. (" M-W" type). LINA invented China's first environmentally friendly Dispersion kneader which is specifically for the kneading of high filling rubber materials, such as carbon black powder, white carbon black powder, ceramic powder, mental powder and so on. this new designed Internal mixer can not only mix powder materials efficiently, but also can prevent dust flying and pollution in the workshop. this type ofIntermeshing Type Rubber Kneader Machine Is designed with hydraulic or electric flipping type, and the double dust proof device is adopted. the rotor types and it is different with tangential rotors. in kneader machines, the rotor must be driven by a constant speed connecting gear, the large diameter of one rotor interacts with the small diameter of the opposite; There are ridges on the rotor, the ridges are helically shaped along the rotor to allow the mixing material to move axially within the mixing chamber. Dispersion mixing is mainly carried out in a small gap between two sizes of rotors.

Characteristics of LINASmall SizeShear Type Dispersion Mixer

1. Higher cleanness: Clean up the material without dead corners; the mixing chamber and rotors can be separated completely; All surface that directly contact with the material is mirror polished, which ensure all the materials easy to clean without stickiness.

2. Wearable inner cavity: Imported special new alloy steel and Vacuum heat treatment are adopted. Strong wear resistance, resistance to horizontal erosion, corrosion resistance and high glossy finish effects are achieved.

3. Adjustable rotor speed ratio: the speed ratio of rotors is adjustable, which target at some special material function requirements and achieve best dispersion effect and efficiency. 

4. Temperature control system: A lot of trials report that stage temperature control has the essential effect of ceramics' color difference. 

5. PLC intelligent control system: 1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), RAM pressure, current, torque and recipe code. 2. the control system can be set up to 20 mixing steps, save 20 recipe spaces. 3. the control system is capable of remote importing of the process recipe and data monitoring, and communicating with MES via Ethernet communication interface. 4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided. 

 

Specifications of LINA3 Liters Small SizeShear Type Dispersion Mixer

 

Item	Specification	Remarks
Type	ShearType
Mixing Capacity	3Liters
Production Yield	2.5-4.0 KG per time	Subject to the proportion of material and dispersion requirements.
Main Motor Power	5.5 KW
Flipping Method	Hydraulic type
Flipping Angle	110
TemperatureControl	HEating or/and cooling	Electric/oil/steam heating and circulating water cooling.
Weight	about1000 KG
Dimensions	about 1600*900*2100mm