Still worried about piles of waste plastic? Now Dongying Group has developed a waste plastic Cracking equipment. the equipment uses high-temperature cracking principles to Crack waste plastics into fuel oil, carbon black and combustible gas. Waste Plastic is not only a social problem, but also a material that can bring you Wealth.

so what is the Working principle of this device that can turn waste into treasure? the Specific process is as follows:

1. Feed waste Plastic into the reactor via an automatic pusher.

2. the reactor Is heated and the temperature reaches a certain height. the waste plastic is Cracked into oil and gas.

3. the oil and Gas that is cracked passes through the condensing system. A part of it is Liquefied into heavy oil and falls into the oil tank. the other part of the Non-condensable gas will be condensed and filtered by the condensing system Until the oil and gas are fully filtered. In addition, the waste plastic Cracking equipment has a vacuum negative pressure device that can provide Negative pressure, divert oil and gas, and ensure that the equipment obtains The maximum oil yield.

4. the liquefied Fuel obtained is finally passed through a dust removal and deodorization device to remove the smoke and odor generated during the combustion of the fuel.

5. When the Reactor temperature drops below 40 degrees, remove the carbon black from the Reactor.

the operation of Our equipment will be able to generate nearly $2,000 in revenue a day. these Gains are mainly due to the fuel oil and carbon black produced during the Operation of the equipment. They are useful in life!

1. Fuel: Mainly Used in iron and steel plants, boiler heating, heavy oil generators, cement Plants

2. Carbon black: It is mainly used for pressure ball combustion and refined milling. Refined Flour can be used for new tires, rubber soles, and pigments.

3. Combustible Gas: It will be recycled by the equipment and reused in the heating material of the reactor.

What are the specific Advantages of DoingGroup's waste plastic pyrolysis  equipment?

1. Adopt Q245R Standard boiler plate steel, the thickness of steel is 16mm. It can withstand High temperature and high pressure.

2. the exterior of the heating system is provided with an external insulation system, which can Save energy consumption and improve the operating efficiency of the equipment.

3. the pinion Rotating device has small power and does not directly contact the reaction Vessel. It has less heat transfer and is not easily deformed.

4. Using a Unique 3-step process welding process, the seams are tighter and have a longer Service life.

5. Safety Devices include oil-water separators, water seals, and vacuum devices.

6. Use the most Common and effective condenser in the oil industry today. It can ensure that the oil and gas are fully cooled and the oil yield is high.