Main Advantages:

  

UEnvironmental advantages

 Does not contain Heavy metals, nitrogen and phosphorus

 No COD and no BOD

 No phosphatinG Residue of phosphate series and other waste

 without the need for sewage treatment

 Meet the requirements of EU ROHS and WEEE directives

 

U EEconomic Benefits

 No heating, using at room Temperature, saving energy

 Short processing Time, reducing process, improving efficiency

 No sediment Transport and clean, without shutdown and clearing residue periodic

 Enhancing the Compliance rate, no phosphating residue, reducing slag point, increasing the Adhesion

 Do not need to modify surface

 Do not need to Closed treatment

 No costs of wastewater treatment

 Process is simple, shortening Length of the line body, without precipitation tower, heat exchangers and other Devices, low-cost of construction of the new line

 

UProcess Performance

 Simple inspection and analysis, Easy to control parameters and treatment effect

 Process is simple and easy to Operate

 Corrosion resistance between iron and zinc serics phosphating process, the time of salt spray test up to 300-500 hours after printing

 through 50KgCm impact tests, no paint off the Front and back

  cross cutTest achieve to 0

 Independent Alkaline cleaning station

 Washing by pure water, washing is Necessary to fully

 

Technical details:

  

30 to 70Kg IC-2011 need to be added to 1000 L working solution.
Different processing time, the amount of IC-2011 per 1000 L working solution:
               Processing Time: 20 to 45 S        the amount of IC-2011: 70Kg
               Processing Time: 45 to 70 S        the amount of IC-2011: 50Kg
               Processing Time: greater than 70 S  the amount of IC-2011: 30Kg

 

Control Points: pH Value is 3.8 to 5.5
Concentration: 3 to 7 %
Time: 40 to 200 S
Temperature:Room temperature
Spraying pressure: 0.5 to 1.5 Bar