Accuracy: | 0.5% |
---|---|
Rated Load: | 1-8000t |
Display Type: | LED |
Type: | Conveyor Scale |
Brand Name: | sanoncorp |
Power Supply: | 127V/220V/380V |
Model Number: | SN-ICS-30 |
Place of Origin: | China (Mainland) |
Quick Details
Specifications
[product description]
ICS-30 Belt Scales is a single roller, full suspension structure electronic belt scale,Simple structure,the lightest weight,the strongest environmental adaptability,the most simple and quick installation, accuracy up to 1%...... ![Conveyor Belt Scale Manufacturers Conveyor Belt Scale Manufacturers](https://upload.ecvv.Com/upload/UserImage/20180704/ConveyorBeltScaleManufacturers_b78c11b5-af83-4d45-bb15-8c9daf6313c1.Jpg)
ICS-30A weighing frame, no lever, full suspension structure design, stable and reliable, the design of the chain code calibration is basically close to the actual calibration value, fully enclosed, moisture, dust, corrosion and reduce the accumulation of materials, will not occur Problems such as zero point instability caused by knife-edge devices and bearing devices...
[Features]
1, no lever full suspension structure;
2, two pressure sensors;
3, the weight of the material through the roller directly on the sensor;4, the use of pressure sensors, so the scale body against lateral force, effectively balance the uneven measurement caused by the material on the belt.
[Scope of application]
It is mainly used on coal feeders and batching scales, and it can also be installed on conveyors with changing conveyor equipment angles.
ICS-30A weighing frame, no lever, full suspension structure design, stable and reliable, the design of the chain code calibration is basically close to the actual calibration value, fully enclosed, moisture, dust, corrosion and reduce the accumulation of materials, will not occur Problems such as zero point instability caused by knife-edge devices and bearing devices...
[Features]
1, no lever full suspension structure;
2, two pressure sensors;
3, the weight of the material through the roller directly on the sensor;4, the use of pressure sensors, so the scale body against lateral force, effectively balance the uneven measurement caused by the material on the belt.
[Scope of application]
It is mainly used on coal feeders and batching scales, and it can also be installed on conveyors with changing conveyor equipment angles.