Advantage:

*  Excellent weather resistance;

*  Anti-wear & anti-crack;

*  Line film is densification and not easy to hide the dirt;

*  Strong UV resistance;

*  Low VOC and no heavy metal content.

 

Construction mode includes spraying application and screed application and extruded application.

 

Contrast of antifouling performance

Pollution source	Pollutants can wipe sexual contrast
	MMA two-component anti-fouling marking	Ordinary products two-component anti-fouling marking	Thermoplastic pavement marking
Sewage
Catering oil pollution
Engine oil
2B pencils
dust
Represents the pollution is easy to remove Represents the pollution is not easy to remove     Represents the pollution is hard to remove

Consumption (Actual consumption depends on the thickness of marking & Roughness of pavement & Local temperature environment )

Surface temperature 25	Spraying application	Screeding application	Mixed mode
Thickness	0.6mm	1.2mm	0.5-0.7mm
Consumption	1kg/	3kg/	Sealing coating:   2kg/ Coating:1kg/
Hardner	15g/	45g/	45g/
Primer	150g/		150g/

Dosage table of curing agent (Used in B component)

Paint	Hardner	Surface temperature()	Ratio of BPO	Surface dry time    (Min)	Curing time  (Min)
B component	White color Powder	5	750g-800g	25	50
		15	700g-750g	20	35
		25	650g-700g	10	20
		35	550g-600g	8	15

Technical Data:

Anti-fouling value:15

Curing time:15minutes

Density (g/cm):1.7

Chromaticity performance (white):85

Abrasion resistance:35mg

Anti wearing value:18

Color:White/Yellow /Customize other colors

 

Typical installation areas:

Urban Rd(very strict to the clean),mining area

 

the matters needing to attention during the construction

1. Dry & Clean & flat of road surface.

2. Damaged road should be repaired before applying.

3. Before applying,should add the hardner according to the ratio to the MMA two-component

(Component B) pavement marking paint,then stir well.

4. Avoid breathing vapors,eyes and skin should not touch the coating.

5. during Construction,eating and drinking and smoking is prohibited.

 

Attention of construction

1. Clean and dry road surface.

2. Construction environment temperature is about 10 to 40, surface temperature generally

Is above 5.

3.  the curing time depends on the consumption of curing agent & the temperature of construction

Environment,but has nothing to do with the thickness of the coating.

4.  Strictly prohibited from direct sunlight during transport and storage,stored in ventilated

and shade and dry place,the storage temperature should be controlled in 0 to 40.

5. during screeding application,it is recommended that two scraper buckets be equipped for

Continous replace