Advantage:

*  High resin content,strong adhesion;

*  Wear resistance,not easy to crack;

*  High efficiency (sprayed with either airless or conventional spray equipment;spray application is used for high output and recovery of existing pavement marking).

Consumption (Actual consumption depends on the roughness of pavement)

Reference Table of Material Consumption
	Spray
Thickness	0.8mm-1.2mm
Paint	2kg-3kg/
Glass Beads	350g/

Technical Data:

Curing time:3minutes

Compression strength:12(23)

Anti slide swing valve:45BPN

Color:White/Yellow/Customize color

 

Typical installation areas:

the road surface is granule bulges and gaps large,the thin siurry sealing layer,gravel seal layer,microtable ans SMA are difficult to be constructed.

Edge line of highway lane

Secondary road which needs the long reflective & marking needs have durability.

the original old line need to be repainted after 2-3 years.

 

the matters needing to attention during the construction

1. Choose paint should be exquisite,easy to melt and not easy to deposit stratification.

2. It is not suitable for construction when the temperature is too low or the air humidity is

Too high,construction is prohibited when the road is wet.

3. the application should ensure continuity.after loading a car,it should be done as long as

Possible without interruption,reducing the number of pauses.

4. the speed of the crossing car should be adjusted according to the fluidity of the coating

and the performance of the vehicle according to the actual principle,the

Control speed is between 2km/h to 4km/h.