Drum Type Wood Chips Making Machine


1.Brief Introduction:

Drum cut piece of machine series products are special equipment of production of wood, the products are widely used in particle board factory, in high density fiberboard, factory, stubble factory, biomass power plant, of wood factory and manufacturer of industrial production preparation before section of the preferred equipment.

2.Techincal parameters:

Type	BX215	BX216	BX218	BX2113
Feeding Port Size(mm)	160*400	300*680	230*500	450*700
Cutter No.(PCS)	2	2	2	2
Roller Speed(rd/hr)	592	650	590	520
Max Raw Materials Diameter(mm)	160	300	230	450
Chips Size(mm)	30	30	30	38
Capacity(t/hr)	3-4	12-15	7-8	15-30
Main Power (kw)	45	110	55	200-250
Feeding Roller Motor(kw)	2.2-3	4-5	3-4	7.5-2
Pump Motor(kw)	1.5*1	1.5*1	1.5*1	3*1
Weight(kg)	2990	7000	4070	11840
Appearance Dimensions(mm)		4670*2150*1500	4348*1730*1258	3670*2517*2050
Feed Conveyor Motor(kw)	3	3	3	3

3.Performance features:

A. The machine adopts high strength steel welding and into, is the whole machine of supporting the foundation.
B. Knife roller are installed on the two or three, four fly knife, use special manufacture of fly knife, through the pressure of bolt, fly knife fixed in the knife roller.
C. According to the thickness of the different raw materials by cutting, feeding roller assembly can use hydraulic system in a certain range to fluctuate.
D.  Cutting down of material through the screen mesh of qualified down at the bottom of the hole, the discharge, big piece of material will be cutting machines.