Modular Welding Table

this is a set of modular clamping System, consisting of basic tables, supporting parts, locating parts, clamping Parts and locking parts. On 3D welding table, any system accessories can be Located and clamped in a variety of ways by "rapid locking bolt"; at the same time, several 3D welding tables can be directly linked together in any Five faces, and can also be linked as a whole through laying tracks on the Ground. The whole modular system demonstrates its general function perfectly in Installing, adjusting and clamping. Because of its simple structure and such Advantages as hole location, bolt connection, high precision, good rigidity, Reusability, convenient assembly and large economic benefits, it is known as " building block in the workshop". 

Tech Parameter:

L Material: Q345B(Steel), HT300(Cast Iron), QT500(Nodular Cast Iron), SUS304(Stainless Steel)

L  Optional Legs: Standard leg/ Holding frame/ Hydraulic lift box/ Heavy duty caster

L without defective holes, cracks, repair welding and other defects after proceeding.

L Hole diameter:28mm/16mm

L Thickness: D2825mm; D1615mm

L Flatness: 0.10/1000mm~ 0.15/1000mm

L Surface Finishment: 1.6m ~3.2m

L Grid Pattern: 100x1000.05mm; 50x500.05mm

L Hole spacing: 1000.03mm; 500.03mm

L Load Capacity: Support leg: 2T/m²; Holding frame support: 3T/m².

L Packing& Delivery: Wrap Flim, Bubble Wrap, Plywood Case

Holding frame(D28/D16)
Dimension	Number
1500x1000x400	Swk28/16-71301
1500x1500x400	Swk28/16-71302
2000x1000x400	Swk28/16-71303
2400x1200x400	Swk28/16-71304
3000x1500x400	Swk28-71305