Basic Info

Impeller Number: Single-Stage Pump Working Pressure: Middle Pressure Pump Influent Type of Impeller: Double-Suction Pump Position of Pump Shaft: Horizontal Pump Export Markets: Global

Additional Info

HS Code: 81437090 Production Capacity: 1000sets/Year

Product Description

Name: TZA-S double-suction pumps

Standard: API610 BB1

Application: the range is suitable for pumping clean liquids with some tolerance of slight Contamination by solids over a wide temperature range. TZA-S pumps can also be Used as energy recovery turbines.

for water Treatment and supply

in Irrigation and drainage systems

for power Stations, heating systems, and district heating plants

in fire Fighting

as marine Ballast and cooling water

for sea Water desalination plants

as Pipeline pumps and pressure boosters

in Process engineering for industries

for Offshore duties

Fan pump for pulp and paper industry.

General

        TZA-S series  are  single  Stage,   double  entry  impellers,   axially-split  Centrifugal  pumps,   arranged  either  horizontally  Or  vertically,   foot  support,   accordant  with  API610.   The  design  feature  can  Be  gained  in  sectional  drawing.

 

Application

  the  range  is  suitable  for  pumping  clean  liquids  with  some  Tolerance  of  slight  contamination  by  solids  over  a  wide  temperature  range.   TDH  Pumps  can  also  be  used  as  energy  Recovery  turbines.

for  Water  treatment  and  supply

in  Irrigation  and  drainage  systems

for  Power  stations,   heating  systems,   and  District  heating  plants

in  Fire  fighting

as  Marine  ballast  and  cooling  water

for  Sea  water  desalination  plants

as  Pipeline  pumps  and  pressure  boosters

in  Process  engineering  for  industries

for  Offshore  duties

Fan  Pump  for  pulp  and  paper  industry.

 

Performance

        Size  DN125  to  600mm.

Capacity  up  to  10000m3/h

Head  up  to  180m  According  to  performance  curves

Pressure  up  to  2.5Mpa.     According  to  material  and  size

Temperature  -20  up  to  degree

 

Specification the  casing  is  axially  Split  with  the  suction  and  discharge  Braches  located  in  the  lower  halt-this  Allows  the  complete  pump  rotor  with  Bearings  to  be  moved  for  maintenance  without  disturbing  the  main  pipework  and  Valves.

Flanges  Are  normally  to  GB  standards  PN2.5Mpa,   Or  ANSI150#.

the  Direction  of  rotation  of  the  pump:   CW  when  viewed  from  the  driven  end.   the  shaft  can  be  reversed  to  allow  the  pump  to  be  driven  from  either  side.