TGA/TGB vertical inline pump is single Stage, single suction, radial split, vertical centrifugal inline pump. Which is Designed in accordance with standard of AP1610(7th edition)and GB3215-82.

 

Application

Petrochemical

Refinery

General industrial process

Water supply and treatment

Pipeline pressurization

Performance

Capacity:3 to600m³/h

Head 4-120m

Pressure:0 to 2.5Mpa

Temperature  TGA: -20 to +150

   TGB: -20 to +250

 

Pumping medium

Various liquid Petrochemicals, organic componds and other corrosive liquids.

Sulphric acid, nitric acid, hydrochloric Acid, phosphoric acid for organic acid and inorganic acid which at various Temperature and concentration.

Sodium hydroxide, sodium carbonate and Alkaline liquid at various temperature and concentration.

All kinds of salt solution.

 

Construction features

TGA pump and motor use shaft with a low Height, and well stability. the bearing bracket between pump and motor of TGB Can be used under high temperature and importance.

Compared to horizontal pump with same Performance, vertical inline pump cover small foundation area, easily connect, Save foundation cost.

Impeller, pump casing and cover with Interchangeable sealing ring, shaft seal with sleeve, easy to maintance, save Spare parts cost.

the pump casing is designed with double Volute casing to decrease radial force and vibration stable operation.

Pump cover has the function of cooling and Heat preservation, which can be used for pumping mediums with special Requirements pump cover with ventilating plug, to vent the air in pipeline or Pumps before operation.

Suitable dimension lf sealing housing, use Gland packing or various mechanical seal, good changeability, low cost of size Deviation, equipped with cooling, flushing, sealing liquid system.

the connection and standard of suction and Discharge flange can be varied with customersRequirements in rated pressure level and Dimension.

Viewed from motor end, pump rotate in Clockwise diameter.