Profile:

Steam Surface CondenserIs designed to condense and deaerate the exhaust steam from the  Turbine. In surface condensers, there is no direct contact between the Exhaust steam and the cooling water. The exhausted steam from the Turbines iscondensed by passing over tubes containing water from the Cooling system. The steam condenses when it comes in contact with the Cold surface of the tubes and due to the heat transfer to cooling water by conduction and convection. these tubes are usually made of stainless Steel, copper alloys, or titaniumdEpending on several selection criteria (such as thermal conductivity or corrosion resistance).

 

Steam Surface CondenserAre to convert the exhaust steam from its gaseous to its liquid state At certain under atmospheric pressure, and also, to release Non-condensable presented in the steam cycle, together with vacuum unit.

 

Because plants needsteamSurface condenserswith long equipment life and low maintenance requirements, RelevantsOlutions partners withour Company to provide the most reliable steam surface condensers Available, with the capacity to condense turbine exhaust steam at very Low pressures. Steam surface condensers are used in power generation, Refining and chemical processing applications to create and maintain a Vacuum at the turbine exhaust. the exhaust steam is converted into Condensate and thenpumped back to the boiler to complete the closed loop process.

 

Steam surface condensersAre offered for power plants ranging in output from3MW to 125MWand in the following configurations:

• Cylindrical, or Rectangular
• Axial or Down or Top Exhaust
• One Pass or Multi-Pass

 

Steam surface condenserIs designed in accordance with the client's specifications to offer the Highest thermal efficiency and structural integrity. The thermal, Hydraulic and mechanical aspects of the condenser are designed using State-of-the-art-technology.  The design is in accordance with the Following codes and standards:Heat Exchange Institute (HEI) and American Society of Mechanical Engineers (ASME).

 

Product Features

• Full peripheral bundle entry of steamLow bundle entrance velocities
• Negligible pressure drop
• Full reheat and deaeration
• Flow induced vibration check
• Uniform distribution of heat loading
• Effective collection and removal of noncondensable gases
• Efficient air cooling section

 

Applications

• Coal-Fired Power Plants
• Cogeneration Plants Waste to Energy/Biomass Plants
• SOlar Power Plants

 

Materials of Construction:

the manufacturing material will be defined based on the characteristics of the circulating fluids and applications.