| After-sales Service Provided: | No overseas service provided |
|---|---|
| Certification: | CE |
| Brand Name: | LNEYA |
| Type: | Compressor |
| Refrigerant: | 5-60 |
Quick Details
Specifications
Box structure
1) Shape: the material of the shell body is made of imported PP high temperature resistant plastic sheet. the appearance is smooth and bright without scratches, corrosion resistance, easy cleaning and no leakage.
2) Inner wall: imported PP plastic sheet, the highest temperature resistance is 80 degrees. the various auxiliary fittings are also corrosion resistant and have a reasonable structural design.
3) Cover: Imported transparent plate, corrosion-resistant, easy to clean, no leakage. during the test, the indoor test conditions can be clearly observed from the outside without affecting the test results. and the cover is designed to have an optimum apex angle of 106 degrees, so that the condensed water generated during the test will not drip onto the sample and affect the test results.
4) the lid and the box are sealed with water to prevent salt spray from overflowing.
5) the spray test of the equipment meets the temperature inside the box at 35 C, and the salt spray settles: 1-2 mL / 80 cm 2 h
6) Air saturator temperature range is Rt+5C--75C, cylindrical stainless steel, normal withstand voltage 0.4MPa
7) the large salt water tank is placed on the right side of the equipment. the drawer design makes it easy to add salt water and clean the salt water tank.
8) the ultra-large capacity can be sprayed at least continuously for one week, and the salt water level can be clearly observed at any time.
9) Heating method: inner tank type heating method, heating up quickly, uniform temperature and humidity distribution
10) Sample holder: designed to tilt the upper and lower layers by 15 degrees and 30 degrees, or by hooking.
11) the equipment control system is designed on the right side of the cabinet, and the operation is simple. An exhaust fan is installed at the rear of the electric control cabinet to dissipate the heat generated during the work to the outside of the equipment.
1) Shape: the material of the shell body is made of imported PP high temperature resistant plastic sheet. the appearance is smooth and bright without scratches, corrosion resistance, easy cleaning and no leakage.
2) Inner wall: imported PP plastic sheet, the highest temperature resistance is 80 degrees. the various auxiliary fittings are also corrosion resistant and have a reasonable structural design.
3) Cover: Imported transparent plate, corrosion-resistant, easy to clean, no leakage. during the test, the indoor test conditions can be clearly observed from the outside without affecting the test results. and the cover is designed to have an optimum apex angle of 106 degrees, so that the condensed water generated during the test will not drip onto the sample and affect the test results.
4) the lid and the box are sealed with water to prevent salt spray from overflowing.
5) the spray test of the equipment meets the temperature inside the box at 35 C, and the salt spray settles: 1-2 mL / 80 cm 2 h
6) Air saturator temperature range is Rt+5C--75C, cylindrical stainless steel, normal withstand voltage 0.4MPa
7) the large salt water tank is placed on the right side of the equipment. the drawer design makes it easy to add salt water and clean the salt water tank.
8) the ultra-large capacity can be sprayed at least continuously for one week, and the salt water level can be clearly observed at any time.
9) Heating method: inner tank type heating method, heating up quickly, uniform temperature and humidity distribution
10) Sample holder: designed to tilt the upper and lower layers by 15 degrees and 30 degrees, or by hooking.
11) the equipment control system is designed on the right side of the cabinet, and the operation is simple. An exhaust fan is installed at the rear of the electric control cabinet to dissipate the heat generated during the work to the outside of the equipment.