Introduction for Diamond washing plant
Gold trommel, also known as a rotary screen, a mechanical screening machine used to separate materials, mainly in the mineral and solid-waste processing industries. It consists of a perforated cylindrical drum that is normally elevated at an angle at the feed end.Physical size separation is achieved as the feed material spirals down the rotating drum, where the undersized material smaller than the screen apertures passes through the screen, while the oversized material exits at the other end of the drum.

Type of Gold trommel wash plant                                   Components for Gold trommel wash plant
1. Stationary & mobile type                                                                     1. Hopper                   2. Screen trommel
2. Small scale & large scale type                                                            3. Motor/Diesel engine
3. Motor engine & diesel engine type                                                     4. Uppersize discharging outlet
4. Single layer & double layer type                                                         5. Bottomsize discharging outlet
5. Heavy duty & light duty processing.                                                   6. Water pump              7. Flushing water pipe
Main Features of Diamond washing plant
1. Anti-jam design.
2. Gear-drive mechanism.
3. Customized sieve size design.
4. Wear-resisting&repleacable sieve.
5. Double sieve ideal material classification.
6. Powerful motor with low power consumption.
7. High dealing capacity&fluent material washing.
Application forDiamond washing plant
Sand wash plant can be used in a variety of applications such as classification of solid waste and recovery of valuable minerals from raw materials
Working Principle for Gold trommel wash plant
1. Feed to the hopper of the trommel by hand or excavator;  gold diamond washing plant
2. the mineral went to the trommel and will be washed by the high pressure water;
3. the particles larger than screen mesh size are discharged as the uppersize materials which could be delivered away by belt conveyor ld diamond washing plant
4. the particles smaller than screen mesh are discharged as undersize materials which could be fed into the following equipment, such as jig machine
5. the Jig machine is saw tooth wave jig machine, which can separate the mineral based on different specific gravity
6. Due to the big gravity of the gold/diamond, the gold/diamond concentrate will finally separated by Jig machine
7. You can add 1 set of sluice box for a clean concentrate for the tailing.