Medium: transformer oil or purified water. For verification, no External pressure source is required, no air exhaust is required.

Standard evaluated point: 0%, 25%, 50%, 75%, 100%, automatic return. It Can be arbitrarily set connected with computer.

Customized verification point: any point.

Verification point automatic stabilization time: 20s, adjustable within (10 ~ 240)s

Overall time of the transmitter automatic verification ( steady after 9 Points ): about 5 minutes

Internal pressure module measuring range:(360)MPa

Customized verification range: intervals within(360)MPa

Units: MPa or units available

Display precision: 5 digits

Pressure accuracy: 0.02% F.S or 0.05% F.S

Current accuracy: 0.02% or 0.05%

Pressure control accuracy:5

Standard evaluated point: 0%, 25%, 50%, 75%, 100%, automatic return. It Can be arbitrarily set connected with computer.

Customized verification point: any point.

Verification point automatic stabilization time: 20s, adjustable within (10 ~ 240)s

Overall time of the transmitter automatic verification ( steady after 9 Points ): about 5 minutes

Pressure switch verification time: about 2 minutes.

HART function

Security protection: overpressure, overcurrent, sensor failure, etc.

Current input: (1 ~ 2) input, (0 ~ 22) mA

Switch input: dry Contact, it can detect contact resistances.

Loop power Supply: DC24V/30mA, which does not damage the standard gauge if it is Incorrectly connected.

Pressure Interface: M20*1.5 female thread quick connector

Current/voltage Interface: 4 standard banana plug

Sewage outlet: Inner diameter: 6 mm

Power supply: 220V/50Hz

Weight: 9kg

Automatic Verification software: optional

External standard Gauge connection