| Surface Finishing: | Immersion Gold |
|---|---|
| Board Thickness: | 1.3 mm |
| Copper Thickness: | 1.0 oz |
| Base Material: | RO4003C mixed with FR-4 |
| Brand Name: | Bicheng Enterprise Limited |
| Min. Line Spacing: | 5.5 mil |
| Min. Line Width: | 7.5 mil |
| Min. Hole Size: | 0.4mm |
| Model Number: | BIC-060-V60 |
| Place of Origin: | China (Mainland) |
| Solder Mask Color: | Green |
| Colour of Component Legend: | White |
| TEST: | 100% Electrical Test prior shipment |
Quick Details
Specifications
Brief Introduction
with the development of electronic communication technology, the communication frequency
Is becoming higher and higher, and the high frequency signal transmission, need to use low
Dielectric constant (Dk), low dielectric loss (Df) but expensive special materials. these materials
Have cyanate and high frequency materials such as polytetrafluoroethylene / ceramic based
Materials (PTFE/Ceramic), hydrocarbons / ceramic based materials (Hydra Carbon/Ceramic).
Usually these materials are expensive.
Reducing the cost is an important means for customers to improve the competitiveness of
Products. Therefore, the customers adopt the laminated structure of mixed materials in the
Design of PCB structure, that is, the necessary signal layer uses high-frequency materials to
Meet the needs of signal transmission. Other line layers are made of conventional fiberglass
Epoxy FR-4, which named a hybrid board.
Available high frequency material (Core)
RO4350BRO4003C
4mil (0.1mm)8mil (0.203mm)
6.6mil (0.168mm)12mil (0.3mm)
10mil (0.254mm)20mil (0.508mm)
13.3mil (0.338mm)32mil (0.813mm)
20mil (0.508mm)60mil (1.524mm)
30mil (0.762mm)
60mil (1.524mm)
PCB Case: 4 Layer PCB on 0.254mm RO4350B
18/18um + FR4 0.36mm 35/35um with Immersion
Gold
(Printed circuit boards are custom-made products, the picture and parameters shown are
Just for reference)
General description
this is a type of 4 Layer PCB mixing 0.254mm (10 mil) RO4350B and 0.36mm FR-4 for
the application of Variable Frequency Drive.
the multilayer mixed-press printed circuit board comprises an insulating dielectric layer and
A signal layer. and the dielectric layer and the signal layer are alternately stacked. the signal
Layer comprises a signal layer for transmitting a high speed signal and a signal layer for
Transmitting a low speed signal. the high frequency characteristic of the RO4350B substrate
Is better than that of FR-4 substrate, and the dielectric loss caused by the transmission signal
Is smaller than that of FR-4 substrate. the invention of multilayer mixed-press can not only
Ensure the high frequency performance of the printed circuit board, but also reduce the
Manufacturing cost of the multilayer PCB made of full high frequency material.
Basic specifications
Base material: RO4350B 0.254 mm + FR4 0.36 mm + PP 0.36 mm
Layer count: 4 layers
Type: Single PCB
Format: 205.15 X 45.68mm = 1 type = 1 piece
Surface finish: Immersion gold
Copper weight: Outer layer 35 m/ Inner layer 35 m
Solder mask / Legend: green / white
Final PCB height: 1.3 mm
Standard: IPC 6012 Class 2
Packing: 20 panels are packed for shipment.
Lead time: 10 working days
Shelf life: 6 months
Features and benefits
the characteristic of low dielectric loss makes the signal loss at a lower level, which makes
the signal transmission of the whole equipment excellent;
Good oxidation resistance and good heat dissipation;
Improved the speed of signal transmission;
Powerful PCB capabilities support your research and development, sales and marketing;
Impedance control test and solder-ability test;
Professional and experienced engineers;
More than 15 years of PCB experience;
UL, ISO14001, TS16949 certified;
Application
RF transmitter,WiFi amplifier, RFID, Attenuator
Parameter and data sheet
Variety of PCBs
Automatic sticking film machine
with the development of electronic communication technology, the communication frequency
Is becoming higher and higher, and the high frequency signal transmission, need to use low
Dielectric constant (Dk), low dielectric loss (Df) but expensive special materials. these materials
Have cyanate and high frequency materials such as polytetrafluoroethylene / ceramic based
Materials (PTFE/Ceramic), hydrocarbons / ceramic based materials (Hydra Carbon/Ceramic).
Usually these materials are expensive.
Reducing the cost is an important means for customers to improve the competitiveness of
Products. Therefore, the customers adopt the laminated structure of mixed materials in the
Design of PCB structure, that is, the necessary signal layer uses high-frequency materials to
Meet the needs of signal transmission. Other line layers are made of conventional fiberglass
Epoxy FR-4, which named a hybrid board.
Available high frequency material (Core)
RO4350BRO4003C
4mil (0.1mm)8mil (0.203mm)
6.6mil (0.168mm)12mil (0.3mm)
10mil (0.254mm)20mil (0.508mm)
13.3mil (0.338mm)32mil (0.813mm)
20mil (0.508mm)60mil (1.524mm)
30mil (0.762mm)
60mil (1.524mm)
PCB Case: 4 Layer PCB on 0.254mm RO4350B
18/18um + FR4 0.36mm 35/35um with Immersion
Gold
(Printed circuit boards are custom-made products, the picture and parameters shown are
Just for reference)
General description
this is a type of 4 Layer PCB mixing 0.254mm (10 mil) RO4350B and 0.36mm FR-4 for
the application of Variable Frequency Drive.
the multilayer mixed-press printed circuit board comprises an insulating dielectric layer and
A signal layer. and the dielectric layer and the signal layer are alternately stacked. the signal
Layer comprises a signal layer for transmitting a high speed signal and a signal layer for
Transmitting a low speed signal. the high frequency characteristic of the RO4350B substrate
Is better than that of FR-4 substrate, and the dielectric loss caused by the transmission signal
Is smaller than that of FR-4 substrate. the invention of multilayer mixed-press can not only
Ensure the high frequency performance of the printed circuit board, but also reduce the
Manufacturing cost of the multilayer PCB made of full high frequency material.
Basic specifications
Base material: RO4350B 0.254 mm + FR4 0.36 mm + PP 0.36 mm
Layer count: 4 layers
Type: Single PCB
Format: 205.15 X 45.68mm = 1 type = 1 piece
Surface finish: Immersion gold
Copper weight: Outer layer 35 m/ Inner layer 35 m
Solder mask / Legend: green / white
Final PCB height: 1.3 mm
Standard: IPC 6012 Class 2
Packing: 20 panels are packed for shipment.
Lead time: 10 working days
Shelf life: 6 months
Features and benefits
the characteristic of low dielectric loss makes the signal loss at a lower level, which makes
the signal transmission of the whole equipment excellent;
Good oxidation resistance and good heat dissipation;
Improved the speed of signal transmission;
Powerful PCB capabilities support your research and development, sales and marketing;
Impedance control test and solder-ability test;
Professional and experienced engineers;
More than 15 years of PCB experience;
UL, ISO14001, TS16949 certified;
Application
RF transmitter,WiFi amplifier, RFID, Attenuator
Parameter and data sheet
| PCB SIZE | 205.15 X 45.68mm = 1piece |
| BOARD TYPE | Multlayer PCB |
| Number of Layers | 4 Layers |
| Surface Mount Components | YES |
| through Hole Components | YES |
| LAYER STACKUP | Copper -----Signal 18um(0.5 oz)+plate TOP layer |
| RO4350B 0.254 mm | |
| Copper -----Signal 0.018 mm | |
| Prepreg 2116 X 3, 0.36mm | |
| Copper ----- Plain 0.035 mm | |
| FR-4 0.36mm | |
| Copper ------- 18um(0.5oz) + plate BOT Layer | |
| TECHNOLOGY | |
| Minimum Trace and Space: | 5.5 mil / 7.5 mil |
| Minimum / Maximum Holes: | 0.4 mm / 5.7 mm |
| Number of Different Holes: | 12 |
| Number of Drill Holes: | 135 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | NA |
| Impedance Control: | N/A |
| Number of Gold finger: | N/A |
| BOARD MATERIAL | |
| Glass Epoxy: | RO4350B Tg280, er<3.48, Rogers Corp.; FR-4 IT158, ITEQ |
| Final foil external: | 1.0 oz |
| Final foil internal: | 1.0 oz |
| Final height of PCB: | 1.3 mm 10% |
| PLATING and COATING | |
| Surface Finish | Immersion Gold |
| Solder Mask Apply to: | both Sides |
| Solder Mask Color: | Green, Taiyo PSR-2000 GT800D |
| Solder Mask Type: | LPI |
| CONTOUR/CUTTING | Routing |
| MARKING | |
| Side of Component Legend | TOP |
| Colour of Component Legend | White, IJR-4000 MW300, Taiyo brand |
| Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
| VIA | Plated through hole(PTH), minimum size 0.4mm. |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | |
| Outline dimension: | 0.0059" |
| Board plating: | 0.0029" |
| Drill tolerance: | 0.002" |
| TEST | 100% Electrical Test prior shipment |
| TYPE of ARTWORK to BE SUPPLIED | Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
Variety of PCBs
Automatic sticking film machine