Brief Introduction
Just as its name implies, high frequency is that the frequency is relatively high, generally refers
to the frequency of >=300 MHz (i.e. Wave length <=1m), that is, the usual radio frequency
Band. the electromagnetic wave of frequency >=1GHz is named microwave.
Typical frequencies for wireless applications:
* Current: 0.9GHz - 2GHz
* 3G systems: 2.5GHz
* Bluetooth: 2.5GHz
* GPS: 12.6GHz
* LMDS: 24GHz and 40GHz
* Automotive: 77GHz
Market: RFID, Wireless communications, base station and antenna, amplifier, military products,
Consumer electronics.  
High frequency printed circuit board or microwave PCB refers to the printed circuit board made
on the high frequency (microwave) substrate copper clad plate. the common types are: Double
-sided board, multilayer board and mixed structure.
Mixed structure includes high performance special substrate, PP sheet + ordinary performance
Board and PP sheet mixed pressing board; high frequency substrate + ordinary FR4 substrate;
High frequency substrate + metal base etc.


PCB Case: Double Sided Microwave PCB Made on
RO4350B with Immersion Gold Finish
(Printed circuit boards are custom-made products, the picture and parameters shown are
Just for reference)

General description
this is a type of double sided PCB built on high frequency material with Tg 280C for the
Application of preamplifier. It's 1.60 mm thick, white silkscreen over green solder mask on
Bottom layer. No solder mask on top layer and immersion gold covering pads on top side.
the base material is used from RogersCorp., 60mil (1.524mm) RO4350B, entire board
Supplying single up. They're fabricated per IPC 6012 Class 2 using supplied Gerber data.
Each 25 boards are packed for shipment. 

Features and benefits
Tg > 280;
Stable electrical properties verus frequency;
Low thermal coefficient of dielectric constant;
Low Z-Axis expansion;
Shows excellent wetting during component soldering and it can avoid copper corrosion;
Environmental-friendly surface treatment, mature technology;
Make delivery on time. Higher than 98% on-time-delivery rate;
Products and Manufacturing are certified by authorized organizations;
Team with passion, discipline, responsibility and honesty;
No minimum order quantity. 1 piece is available;
Experienced sales persons and skilled customer services;


Application
Preamplifier,Radar sensors,Analogue transmitter,Attenuator

Parameter and data sheet

PCB SIZE	34 x 21mm=1PCS
BOARD TYPE	Double sided PCB
Number of Layers	2 layers
Surface Mount Components	YES
through Hole Components	NO
LAYER STACKUP	Copper ------- 35um(1 oz)+plate TOP layer
	RO4350B 1.524mm
	Copper ------- 35um(1oz) + plate  BOT Layer
TECHNOLOGY
Minimum Trace and Space:	15 mil / 15 mil
Minimum / Maximum Holes:	N/A
Number of Different Holes:	N/A
Number of Drill Holes:	N/A
Number of Milled Slots:	0
Number of Internal Cutouts:	0
Impedance Control:	no
Number of Gold finger:	0
BOARD MATERIAL
Glass Epoxy:	RO4350B Tg280, er<3.48, Rogers Corp.
Final foil external:	1.5 oz
Final foil internal:	N/A
Final height of PCB:	1.6 mm 10%
PLATING and COATING
Surface Finish	Immersion gold
Solder Mask Apply to:	Bottom, 12micron Minimum
Solder Mask Color:	Green, PSR-2000GT600D, Taiyo Supplied.
Solder Mask Type:	LPSM
CONTOUR/CUTTING	Routing
MARKING
Side of Component Legend	Bottom
Colour of Component Legend	White, IJR-4000 MW300, Taiyo brand
Manufacturer Name or Logo:	Marked on the board in a conductor and leged FREE AREA
VIA	N/A
FLAMIBILITY RATING	UL 94-V0 Approval MIN.
DIMENSION TOLERANCE
Outline dimension:	0.0059"
Board plating:	0.0029"
Drill tolerance:	0.002"
TEST	100% Electrical Test prior shipment
TYPE of ARTWORK to BE SUPPLIED	Gerber RS-274-X, PCBDOC etc
SERVICE AREA	Worldwide, Globally.

Variety of PCBs


Disposal before drill film