| Surface Finishing: | Immersion Gold |
|---|---|
| Board Thickness: | 1.6mm |
| Copper Thickness: | 1.5 oz |
| Base Material: | RO4350B and FR-4 |
| Brand Name: | Bicheng Enterprise Limited |
| Min. Line Spacing: | 10 mil |
| Min. Line Width: | 4.9 mil |
| Min. Hole Size: | 0.4mm |
| Model Number: | BIC-102-V102 |
| Place of Origin: | China (Mainland) |
| Solder Mask Color: | Green |
| Colour of Component Legend: | White |
| TEST: | 100% Electrical Test prior shipment |
Quick Details
Specifications
Brief Introduction
with the development of electronic communication technology, the communication frequency
Is becoming higher and higher, and the high frequency signal transmission, need to use low
Constant (Dk), low dielectric loss (Df) but expensive special materials. these materials have
Cyanate and high frequency materials such as polytetrafluoroethylene / ceramic based materials
(PTFE/Ceramic), hydrocarbons / ceramic based materials (Hydra Carbon/Ceramic).
Usually these materials are expensive.
Reducing the cost is an important means for customers to improve the competitiveness of
Products. Therefore, the customers adopt the laminated structure of mixed materials in the
Design of PCB structure, that is, the necessary signal layer uses high-frequency materials to
Meet the needs of signal transmission. Other line layers are made of conventional fiberglass
Epoxy FR-4, which we call a hybrid board.
Available high frequency material (Core)
RO4350BRO4003C
4mil (0.1mm)8mil (0.203mm)
6.6mil (0.168mm)12mil (0.3mm)
10mil (0.254mm)20mil (0.508mm)
13.3mil (0.338mm)32mil (0.813mm)
20mil (0.508mm)60mil (1.524mm)
30mil (0.762mm)
60mil (1.524mm)
PCB Case: Hybrid Printed Circuit Board Mixed Material
PCB on 10mil RO4350B + FR4
(PCB's are custom-made products, the picture and parameters shown are just for
Reference)
General description
this is a type of hybrid multilayer PCB (mixed material PCB) built on 10 mil RO4350B
and FR-4 substrates for the application of Fleet GPS Tracking. It's standard 1.60 mm
Thick with 1oz copper each layer, white silkscreen over green solder mask covering
both sides. Immersion gold is plated on pads and vias are tented. the base material
Is used from Rogers Corp. and ITEQ, entire board supplying 1 up PCB. They're
Fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 25 panels are
Packed for shipment.
Features and benefits
the dielectric constant (DK) is low and stable, so the signal transmission is good
without delay;
the temperature coefficient of dielectric constant is among the lowest of any
Circuit board material, making it ideal for temperature sensitive applications;
SI performance improvement over the stack-UPS with all FR4 board;
Cost reduction over stack-UPS with all low loss material;
Long storage time, it can be stored for more than 1 year in vacuum bag;
High solderability, no stressing of circuit boards and less contamination of PCB
Surface;
RoHS materials;
Eligible products rate of first production: >95%
ISO9001, ISO14001, TS16949, UL Certified;
Application
Satellite antenna,Transmitter combiner,Sound control switch induction,Combiner
Parameter and data sheet
Variety of PCBs
LDI equipment
with the development of electronic communication technology, the communication frequency
Is becoming higher and higher, and the high frequency signal transmission, need to use low
Constant (Dk), low dielectric loss (Df) but expensive special materials. these materials have
Cyanate and high frequency materials such as polytetrafluoroethylene / ceramic based materials
(PTFE/Ceramic), hydrocarbons / ceramic based materials (Hydra Carbon/Ceramic).
Usually these materials are expensive.
Reducing the cost is an important means for customers to improve the competitiveness of
Products. Therefore, the customers adopt the laminated structure of mixed materials in the
Design of PCB structure, that is, the necessary signal layer uses high-frequency materials to
Meet the needs of signal transmission. Other line layers are made of conventional fiberglass
Epoxy FR-4, which we call a hybrid board.
Available high frequency material (Core)
RO4350BRO4003C
4mil (0.1mm)8mil (0.203mm)
6.6mil (0.168mm)12mil (0.3mm)
10mil (0.254mm)20mil (0.508mm)
13.3mil (0.338mm)32mil (0.813mm)
20mil (0.508mm)60mil (1.524mm)
30mil (0.762mm)
60mil (1.524mm)
PCB Case: Hybrid Printed Circuit Board Mixed Material
PCB on 10mil RO4350B + FR4
(PCB's are custom-made products, the picture and parameters shown are just for
Reference)
General description
this is a type of hybrid multilayer PCB (mixed material PCB) built on 10 mil RO4350B
and FR-4 substrates for the application of Fleet GPS Tracking. It's standard 1.60 mm
Thick with 1oz copper each layer, white silkscreen over green solder mask covering
both sides. Immersion gold is plated on pads and vias are tented. the base material
Is used from Rogers Corp. and ITEQ, entire board supplying 1 up PCB. They're
Fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 25 panels are
Packed for shipment.
Features and benefits
the dielectric constant (DK) is low and stable, so the signal transmission is good
without delay;
the temperature coefficient of dielectric constant is among the lowest of any
Circuit board material, making it ideal for temperature sensitive applications;
SI performance improvement over the stack-UPS with all FR4 board;
Cost reduction over stack-UPS with all low loss material;
Long storage time, it can be stored for more than 1 year in vacuum bag;
High solderability, no stressing of circuit boards and less contamination of PCB
Surface;
RoHS materials;
Eligible products rate of first production: >95%
ISO9001, ISO14001, TS16949, UL Certified;
Application
Satellite antenna,Transmitter combiner,Sound control switch induction,Combiner
Parameter and data sheet
| PCB SIZE | 195 x 82mm=1PCS |
| BOARD TYPE | Multilayer PCB |
| Number of Layers | 4 layers |
| Surface Mount Components | YES |
| through Hole Components | YES |
| LAYER STACKUP | Copper ------- 35um(1 oz)+plate TOP layer |
| RO4350B 0.254mm | |
| Copper ------- 35um | |
| FR-4 1.0mm | |
| Copper ------- 35um | |
| FR-4 0.254mm | |
| Copper ------- 35um(1oz) + plate BOT Layer | |
| TECHNOLOGY | |
| Minimum Trace and Space: | 10 mil / 4.9 mil |
| Minimum / Maximum Holes: | 0.4 mm / 2.2 mm |
| Number of Different Holes: | 2 |
| Number of Drill Holes: | 79 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | NO |
| Impedance Control: | no |
| Number of Gold finger: | 0 |
| BOARD MATERIAL | |
| Glass Epoxy: | RO4350B Tg280, er<3.48, Rogers Corp; FR-4 IT158 |
| Final foil external: | 1.5 oz |
| Final foil internal: | 1 oz |
| Final height of PCB: | 1.6 mm 10% |
| PLATING and COATING | |
| Surface Finish | Immersion gold |
| Solder Mask Apply to: | TOP, 12micron Minimum |
| Solder Mask Color: | Green, PSR-2000GT600D, Taiyo Supplied. |
| Solder Mask Type: | LPSM |
| CONTOUR/CUTTING | Routing |
| MARKING | |
| Side of Component Legend | both top and bottom sides |
| Colour of Component Legend | White, IJR-4000 MW300, Taiyo brand |
| Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
| VIA | Plated through hole(PTH), minimum size 0.4mm. |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | |
| Outline dimension: | 0.0059" |
| Board plating: | 0.0029" |
| Drill tolerance: | 0.002" |
| TEST | 100% Electrical Test prior shipment |
| TYPE of ARTWORK to BE SUPPLIED | Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
Variety of PCBs
LDI equipment