Clarifications of FPC
According to the combination of base material and copper foil, flexible circuit board can
Be divided into two types: flexible board with adhesive and flexible board without adhesive.
the price of non-adhesive flexible PCB is much higher than that of adhesive flexible PCB,
but its flexibility, bonding force between copper foil and substrate and flatness of solder
Are also better than that of adhesive flexible PCB. So it is only used in the high demand
Situations, such as the: COF (CHIP ON FLEX, flexible board with bare chip, the high flatness
of the pad) and so on. Because its price is high, most of the flexible PCBs used in the market
Are still adhesive flexible circuit board. Because the flexible circuit board is mainly used in the
Situation where bending is required, if the design or process is not reasonable, it is easy to
Produce micro-cracks, welding and other defects.

Economy of using FPC
If the circuit design is relatively simple, the total volume is small, and the space is suitable,
the traditional internal connection is much cheaper. Flexible circuits are a good design option
If the circuit is complex, processes many signals or has special electrical or mechanical
Requirements. When the size and performance of applications exceed the capacity of rigid
Circuits, flexible assembly is the most economical. A 12mil pad with a 5mil through hole
and a flexible circuit with 3mil lines and spacing can be fabricated on a thin film. Therefore,
It is more reliable to mount the chip directly on the film. There is no flame retardant that
Could be an ion source. these films may be protective and solidified at higher temperatures
to obtain higher glass transition temperatures. Flexible materials are less costly than rigid
Materials because they are free of connectors.



FPC Case: Single Sided Flexible PCB Strips with
Polyimide Stiffener
(FPC's are custom-made products, the picture and parameters shown are just for reference)

General description
this is a type of flexible printed circuit for the application of Surveillance System. It's a
Single layer FPC at 0.15mm thick. the base laminate is from ITEQ, It's fabricated per
IPC 6012 Class 2 using supplied Gerber data. FR-4 as stiffener is applied on the 4 tails
and polyimide stiffener on the inserting heads.


Parameter and data sheet

Size of Flexible PCB	230.5 X 30.8mm
Number of Layers	1
Board Type	Flexible PCB
Board Thickness	0.15mm
Board Material	Polyimide (PI) 25m
Board Material Supplier	ITEQ
Tg Value of Board Material	60
PTH Cu thickness	20 m
Inner Iayer Cu thicknes	N/A
Surface Cu thickness	35m (1oz)
Coverlay Colour	Yellow
Number of Coverlay	2
Thickness of Coverlay	25 m
Stiffener Material	Polyimide
Stiffener Thickness	0.2mm
Type of Silkscreen Ink	IJR-4000 MW300
Supplier of Silkscreen	TAIYO
Color of Silkscreen	White
Number of Silkscreen	1
Peeling test of Coverlay	No peelable
Legend Adhesion	3M 90 No peeling after Min. 3 times test
Surface Finish	Immersion Gold
Thickness of Nickle/Gold	Au: 0.03m(Min.); Ni 2-4m
RoHS Required	Yes
Famability	94-V0
Thermal Shock Test	Pass, -25125, 1000 cycles.
Thermal Stress	Pass, 3005,10 seconds, 3 cycles. No delamination, no Blistering.
Function	100% Pass electrical test
Workmanship	Compliance with IPC-A-600H & IPC-6013C Class 2

Features and benefits
Excellent flexibility
Reducing the volume
Weight reduction
Consistency of assembly
Increased reliability
Controllability of electrical parameter design
the end can be whole soldered
Material optionality
Low cost
Continuity of processing
No minimum order quantity and low cost sample.
High technology

Application
Antenna FPC, Battery flex board, industrial surveying and mapping instrument


Variety of PCBs


Ionic contamination tester