Description

Thermal transfer printing equipment Blanket, also called endless seamless blanket, endless loop blanket tape, is made of 100% nomex fiber, the maximum temperature of 280 degrees Celsius, due to the special process, so there have no joints and it is the real seamless, the surface is more smooth, and has acid, alkali, heat, cold, abrasion, oil, burning resistance, high temperature, flame retardant, heat, non-slip, moisture, anti-static, anti-corrosion and other features.

 

Specification:

Materials: Nomex fiber

Density: 2800~3850G/M2

Width: 600~4000mm

Perimeter: 2200mm, 2600mm, 3400mm, 5000mm, etc

Thickness: 7~8mm,10~11mm

Temperature: 210~280 C

 

ADvantage

1. Selection of Brand Raw Material,Common Specifications Have Temperature 160-180 And 220-280.

2. the Felt Belt Contains Heat Shrinkable Fiber Material Inside,the Felt Will Automatically Shrink after Heating,Wrapped Tightly.

3. the Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life.

Application

1. Selection of Brand Raw Material,Common Specifications Have Temperature 160-180 And 220-280.

2. the Felt Belt Contains Heat Shrinkable Fiber Material Inside,the Felt Will Automatically Shrink after Heating,Wrapped Tightly.

3. the Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life.

 

Direction of our felt belt

1. the blanket must be install as the direction of the arrow, fixing both sides of the perimeter

to see if the perimeter is the same.

2. Adjust the machine pressure within 2kg. Heat up to 150, idle for 2 hours; heat up to

170, idle for 2 hours; heat up to 190, idle 3 hours( important); heat up to 200,

Idle for 2 hours.

3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg

According to your needed and start to printing.

High Temperature Resistance Felt Roller Tube/Seamless Conveyor Belt/Strip Pad /Spacer Sleeve Felt,

Heat Transfer Printing Felt ,

Sanforizing/Calendaring/Compacting Felt

Timing Belt

Aerogel Blanket