Description

PBO felt pad is made of high temperature fiber PBO + Kevlar fiber + high temperature fabric.Considering the discharge port's temperature is very high,and will have high density requirements,so the PBO block will be involved in a middle layer of high temperature fabric, so that Acupuncture will be better,each layer of cotton to better stab together, finished product density will increase. In general, pure PBO felt blocks (made of 100% PBO fibers) are more suitable for aluminum extrusion machines with double-sided discharge ports.

 

Specification

Color:Brown+Yellow

Material:PBO(Surface)+Para aramid(in layer)+ Para aramid fabric

Temperature Resistance:600(<10min)550(Long time)

Length:100mm25000mm

Width:20mm1700mm

Total Thickness:5mm15mm

PBO Thickness:2mm8mm

Hard Degree:by resin and hard treatment

 

Application

Applied to extrusion machine's run out table to replace the graphite material

Aluminium extrusion press exit, especially for thos demanding profiles

as the substitute for graphite slats, 600 PBO Pad is mainly used on the very beginning of the extruders press spout, avoiding scratches and dark marks caused by graphite. It is especially suitable for those demanding extruded profiles.

 

Advantage

1.Heat resistant up to 600

2.No elongation under high tension and heavy load

3.No seam, splice or joints: no breaks due to weak zone,High density structure

4.Smooth and even belt surface: scratch-free extrusions

5.Excellent belt tracking on the cooling table

6.Low heat conductivity and high density with good wear resistance and impact resistance property under heavy conditions

High Temperature Resistance Felt Roller Tube/Seamless Conveyor Belt/Strip Pad /Spacer Sleeve Felt,

Heat Transfer Printing Felt ,

Sanforizing/Calendaring/Compacting Felt

Timing Belt

Aerogel Blanket