| Surface Finishing: | Electroless nickel over Immersion Gold (ENIG) |
|---|---|
| Board Thickness: | 1.6mm |
| Copper Thickness: | 1.5 oz |
| Base Material: | RO4003C 60mil |
| Brand Name: | Bicheng Enterprise Limited |
| Min. Line Spacing: | 10 mil |
| Min. Line Width: | 12 mil |
| Min. Hole Size: | 0.3mm |
| Model Number: | BIC-009-V9 |
| Place of Origin: | China (Mainland) |
| Solder Mask Color: | no solder mask required |
| Colour of Component Legend: | no silkscreen required |
| TEST: | 100% Electrical Test prior shipment |
Quick Details
Specifications
Brief Introduction
RO4003C High Frequency Circuit Material is glass reinforced hydrocarbon/ceramic laminates
(Not PTFE) designed for performance sensitive, high volume commercial applications. Double
Sided and multilayer RO4003C PCB and hybrid RO4003C PCB are available at Bicheng company
at present. Double sided RO4003c PCB with thickness 12mil (0.305mm), 20mil (0.508mm) and
32mil (0.813mm) are the bestsellers. We provide prototype runs, small batches and volume
Production services.
Advantages
1) Excellent high frequency performance due to low dielectric tolerance and loss;
2) Excellent dimensional stability.
3) Low thermal coefficient of dielectric constant;
4) Low Z-Axis expansion;
5) Low in-plane expansion coefficient;
6) Stable electrical properties verus frequency;
Applications
1) Attenuator, Automatic gate induction;
2) LNB's for direct broadcast satellites;
3) Microstrip antenna, spread spectrum;
4) Microstrip and cellular base station antennas and power amplifiers;
5) RF identifications tags
6) Spread spectrum communications systems
7) Trunk amplifier, splitter module etc.
PCB Case: RO4003C 60 mil High Frequency PCB
Immersion Gold
(PCB's are custom-made products, the picture and parameters shown are just for
Reference)
General description
this is a type of high frequency PCB built on RO4003C for the application of WiMax. It's
A 2 layer RF PCB board at 1.6 mm thick. It's immersion gold finish without solder mask
and silkscreen. It's fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 10
Boards are packed for shipment.
Features and benefits
Reducing signal loss in high frequency application meets the development needs of
Communication technology.
Excellent high frequency performance due to low dielectric tolerance and loss.
Stable electrical coefficient of dielectric constant.
ENIG has good oxidation resistance and good heat dissipation.
Make delivery on time keeping 98% on-time-delivery rate.
UL, ISO certified PCB manufacturing factory.
Focus on low to medium volume production
High quality helps customers win cost-saving.
Great customer service
Application
RF module, Video transmission gear, Analogue transmitter, Automatic gate induction
Parameter and data sheet
Variety of PCBs
Developing line
RO4003C High Frequency Circuit Material is glass reinforced hydrocarbon/ceramic laminates
(Not PTFE) designed for performance sensitive, high volume commercial applications. Double
Sided and multilayer RO4003C PCB and hybrid RO4003C PCB are available at Bicheng company
at present. Double sided RO4003c PCB with thickness 12mil (0.305mm), 20mil (0.508mm) and
32mil (0.813mm) are the bestsellers. We provide prototype runs, small batches and volume
Production services.
Advantages
1) Excellent high frequency performance due to low dielectric tolerance and loss;
2) Excellent dimensional stability.
3) Low thermal coefficient of dielectric constant;
4) Low Z-Axis expansion;
5) Low in-plane expansion coefficient;
6) Stable electrical properties verus frequency;
Applications
1) Attenuator, Automatic gate induction;
2) LNB's for direct broadcast satellites;
3) Microstrip antenna, spread spectrum;
4) Microstrip and cellular base station antennas and power amplifiers;
5) RF identifications tags
6) Spread spectrum communications systems
7) Trunk amplifier, splitter module etc.
PCB Case: RO4003C 60 mil High Frequency PCB
Immersion Gold
(PCB's are custom-made products, the picture and parameters shown are just for
Reference)
General description
this is a type of high frequency PCB built on RO4003C for the application of WiMax. It's
A 2 layer RF PCB board at 1.6 mm thick. It's immersion gold finish without solder mask
and silkscreen. It's fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 10
Boards are packed for shipment.
Features and benefits
Reducing signal loss in high frequency application meets the development needs of
Communication technology.
Excellent high frequency performance due to low dielectric tolerance and loss.
Stable electrical coefficient of dielectric constant.
ENIG has good oxidation resistance and good heat dissipation.
Make delivery on time keeping 98% on-time-delivery rate.
UL, ISO certified PCB manufacturing factory.
Focus on low to medium volume production
High quality helps customers win cost-saving.
Great customer service
Application
RF module, Video transmission gear, Analogue transmitter, Automatic gate induction
Parameter and data sheet
| PCB SIZE | 40 x 42mm=1PCS |
| BOARD TYPE | RF PCB, Microwave PCB |
| Number of Layers | Double sided PCB |
| Surface Mount Components | YES |
| through Hole Components | YES |
| LAYER STACKUP | Copper ------- 35um(1oz)+PLATE |
| RO4003C 60mil | |
| Copper ------- 35um(1oz)+PLATE | |
| TECHNOLOGY | |
| Minimum Trace and Space: | 10mil/12mil |
| Minimum / Maximum Holes: | 0.3/2.3mm |
| Number of Different Holes: | 4 |
| Number of Drill Holes: | 155 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | 0 |
| Impedance Control | NO |
| BOARD MATERIAL | |
| Glass Epoxy: | RO4003C 60mil, Tg 288 |
| Final foil external: | 1.5oz |
| Final foil internal: | 0oz |
| Final height of PCB: | 1.6mm 0.16 |
| PLATING and COATING | |
| Surface Finish | Electroless nickel over Immersion Gold (ENIG)( 2 " over 100 " nickel) |
| Solder Mask Apply to: | No Solder mask reqruied |
| Solder Mask Color: | No solder mask required |
| Solder Mask Type: | No solder mask reqruied |
| CONTOUR/CUTTING | Routing |
| MARKING | |
| Side of Component Legend | No silkscreen required |
| Colour of Component Legend | No silkscreen required |
| Manufacturer Name or Logo: | No silkscreen required |
| VIA | Plated through Hole(PTH) |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | |
| Outline dimension: | 0.0059" (0.15mm) |
| Board plating: | 0.0030" (0.076mm) |
| Drill tolerance: | 0.002" (0.05mm) |
| TEST | 100% Electrical Test prior shipment |
| TYPE of ARTWORK to BE SUPPLIED | Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
Variety of PCBs
Developing line